Design Guide
66 | Sub-Zero Customer Care 800.222.7820
Wine Storage
Custom Panel—DEU2450W
For model DEU2450W, the custom door panel will attach
directly to the door frame with screws through a series of
pre-drilled holes.
Refer to the charts below for panel requirements and
dimensions.
PANEL REQUIREMENTS
Panel Weight 22 lb (10 kg) max
Panel Thickness ⁄" (16) min–⁄" (19) max
TYPICAL PANEL DIMENSIONS
Custom Panels
For framed, overlay, Designer, and flush inset applications,
a custom door panel must be provided. Handle hardware
must also be provided for overlay, Designer, and flush inset
applications. Refer to the panel requirements and custom
panel dimensions charts for your specific model and
design application.
Do not install a solid panel on a glass door unit. A solid
door is available as a sales accessory (except model
BW-30) and must be installed if a solid panel is being spec-
ified. Service may be required to install the door. Contact
an authorized Sub-Zero dealer for more information. Over-
all dimensions are the same for glass and solid door panels.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass
door models.
H
W
H
W
PANEL DIMENSIONS
MODEL W H
DEU2450W 23⁄" (603) 30⁄" (772)
STILES / RAILS MIN
Stiles 3⁄" (83)
Top Rail 3⁄" (89)
Bottom Rail 4⁄" (114)