User Guide

5
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION SPECIFICATIONS
The illustrations below provide the overall
dimensions, finished cut-out dimensions and
e
lectrical placement for the Wolf induction
cooktop.
When the cooktop is installed above cabinets,
the electrical placement is not critical. A
g
rounded junction box needs to be placed
within 4' (1.2 m) of the right rear of the
cooktop.
IMPORTANT NOTE: A minimum height clear-
ance of 6" (152) is required. If a shelf is installed
below the unit, a 1" (25) gap at the rear of the
cabinet shelf is necessary to allow for proper
ventilation. Failure to do so could result in
decreased performance or product damage.
E
13
3
/8" (340)
CUT-OUT
WIDTH
6"
(152)
FRONT OF COUNTERTOP
15"
(381)
15"
(381)
33" (838)
RECOMMENDED
CABINET WIDTH
2
1
/2"min
(64)
19
1
/4" (489)
COOKTOP
CUT-OUT DEPTH
13
3
/8" (340)
COOKTOP
CUT-OUT
WIDTH
19
1
/4" (489)
COOKTOP CUT-OUT
DEPTH
2
1
/2"min
(64)
18"
(457)
2"**
(51)
18"
(457)
2"**
(51)
24" OR 30"*
(610 or 762)
TO COOKING
SURFACE
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side.
*Minimum 24" (610) from protected cabinet or 30" (762) from unprotected cabinet to cooking surface.
**Minimum clearance from side edge of cooktop cut-out to combustible surface up to 18" (457) above cooking surface.
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
21"
(533)
OVERALL
DEPTH
15" (381)
OVERALL WIDTH
2
1
/2"
(
64
)
MODEL CT15I/S DIMENSIONS
O
verall Width 15" (381)
Overall Height 2
1
/2" (64)
Overall Depth 21" (533)
Minimum Cabinet Depth 22
3
/4" (578)
Minimum Height Clearance 6" (152)
Cut-Out Width* 13
3
/8" (340)
Cut-Out Depth 19
1
/4" (489)
*If the induction cooktop is to be used with any
combination of additional cooktops or modules
with a filler strip, the cut-out width increases to
14" (356).
INSTALLATION INSTRUCTIONS
Overall Dimensions
Installation Specifications and
Countertop Cut-Out Dimensions