User Guide

6
MULTIPLE COOKTOP INSTALLATION
I
MPORTANT NOTE:
I
f the induction cooktop is
to be used with any combination of additional
cooktop units or modules with a filler strip, the
c
ut-out width is calculated by adding the corre-
sponding units' cut-out dimensions plus 1
1
/4"
(32) for each additional unit.
If multiple modules are to be installed, the cut-
out width of the induction cooktop should be
increased from 13
3
/8" (340) to 14" (356). Refer
to the illustration below.
IMPORTANT NOTE: When multiple units are
installed side by side, each unit must have its
own separate recommended electrical circuit.
IMPORTANT NOTE: When two or more
modules are installed together, an integrated
module filler strip (IFILLER/S) is required. If a
downdraft ventilation system is also installed,
an integrated module support for downdraft
ventilation (ISUPPORT) is required. Contact
your Wolf dealer for information on these
accessory components.
WOLF INDUCTION COOKTOP
INSTALLATION SPECIFICATIONS
COUNTERTOP CUT-OUT
T
he induction cooktop is designed to fit a
standard 24" (610) deep base cabinet with 25"
(635) deep countertop. Before making the
c
ooktop cut-out, verify that the cooktop will
clear the side walls of the base cabinet below.
There should be at least 5
1
/2" (140) clearance
between the top countertop surface and any
combustible surface directly below the unit.
This includes upper edges of drawers located
directly below unit.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, refer
to the illustration below for countertop cut-out
dimensions.
IMPORTANT NOTE: Plastic or other utensils
with low melting temperatures should not be
located in drawers directly below unit.
2
1
/2"min
(64)
FRONT OF COUNTERTOP
19
1
/4"
(489)
CUT-OUT
DEPTH
29
1
/4" (743)
TWO MODULES WIDTH
44
1
/2" (1130) THREE MODULES WIDTH OR
44
1
/4" (1124) 30" COOKTOP AND ONE MODULE
59
3
/4" (1518) FOUR MODULES WIDTH OR
59
1
/2" (1511) 30" COOKTOP AND TWO MODULES OR
50
1
/4" (1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
Countertop cut-out dimensions for installation of multiple cooktops