design guide

subzero.com/specs
|
67
WINE STORAGE
TYPICAL PANEL DIMENSIONS
W
49
3
/8"
(1254)
13
9
/16"
(345)
16
11
/16"
(424)
W
79
7
/8"
(2029)
Column
Tall
Custom Panel—Integrated
For integrated (IW) models, a custom door panel and handle
hardware must be provided. Refer to the panel requirements
chart and typical panel dimensions.
Do not install a solid panel on the glass door unit. A solid
door is available as a sales accessory through an authorized
Sub-Zero dealer.
The thickness of the custom panel can vary. A minimum
5
/8" (16) thick panel is required, but the thickness can be
increased provided it does not exceed the weight limit. The
depth of each integrated model is 24"
(610). Allow for panel
thickness when planning the nished opening depth. Refer
to the full-scale template on page 53.
CAUTION
As reveals between cabinetry and the unit decrease,
severe nger pinching can occur while door is closing.
Finish all sides of custom panels. They will be visible when
the door/drawer is open.
D-style handles are recommended. Door handles must be
located near the edge of the panel opposite the hinge and
should be centered top to bottom. Drawer handles must
be located near the top edge of each panel. Stainless steel
tubular and pro handles are avail able through an authorized
Sub-Zero dealer. For local dealer information, visit the nd a
showroom section of our website, subzero.com.
PANEL REQUIREMENTS
STILES / RAILS WIDTH
Stiles 3
1
/4" (83)
Top Rail 7
3
/4" (197)
Bottom Rail 9
1
/2" (241)
Bottom Rail (IW-30R) 4
1
/2" (114)
WEIGHT PER PANEL MAX
Door Frame 35 lb (16 kg)
Door Frame (IW-30R) 25 lb (11 kg)
Drawer Panel 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels
5
/8" (16)
Typical panel dimensions are based on an 84" (2134) nished
height, 4"
(102) toe kick and
1
/8" (3) reveals. Panel dimen-
sions must be adjusted accordingly for all other installations.
Refer to the illustration for panel heights and the chart below
for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
3
/4" (451)
24" Model 23
3
/4" (603)
30" Model 29
3
/4" (756)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel
heights and the chart below for panel widths.
PANEL WIDTH
MODEL W
18" Model 17
13
/16" (452)
24" Model 23
13
/16" (605)
30" Model 29
13
/16" (757)
BUILT-IN PRO 48 INTEGRATED WINE UNDERCOUNTER