User Guide

7
INSTALLATION INSTRUCTIONS
INSTALLATION OPTIONS
MULTIPLE COOKTOP INSTALLATION
I
f the multi-function cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width is
c
alculated by adding the corresponding units'
cut-out dimensions plus 1
1
/4" (32) for each
additional unit. Refer to the illustration below.
IMPORTANT NOTE: When multiple cooktops
and/or modules are installed side by side, each
unit must have its own separate recommended
electrical circuit. When multiple gas cooktops
and/or modules are installed next to one
another, they can receive their gas supply from
a common line. However, each unit
MUST
have its own gas pressure regulator installed
between the mainline and the cooktop or
module.
When two or more modules are installed
together, an integrated module filler strip
(IFILLER/S) is required. If a downdraft ventila-
tion system is also installed, an integrated
module support for downdraft ventilation
(ISUPPORT) is also required. Contact your Wolf
dealer for information on these accessory
components.
2
1
/2"min
(64)
FRONT OF COUNTERTOP
19
1
/4"
(489)
CUT-OUT
DEPTH
29
1
/4" (743)
TWO MODULES WIDTH
44
1
/2" (1130) THREE MODULES WIDTH OR
44
1
/4" (1124) 30" COOKTOP AND ONE MODULE
59
3
/4" (1518) FOUR MODULES WIDTH OR
59
1
/2" (1511) 30" COOKTOP AND TWO MODULES OR
50
1
/4" (1276) 36" COOKTOP AND ONE MODULE
14"
(356)
CUT-OUT
WIDTH
Countertop cut-out dimensions for installation of multiple cooktops
and/or modules
OPTIONAL
INSTALLATIONS
Dimensions will
vary according to
the specific
installation.
IMPORTANT NOTE: Refer to specific
installation requirements and limitations for
e
ach integrated module. Review specific
installation instructions for product to product
capabilities. Additional information is provided
o
n our website, wolfappliance.com