User Guide

ISLAND | PENINSULA INSTALLATIONS
M
inimum clearances to combustible
surfaces:
Island Installations: Minimum 12" (305)
clearance to rear wall that rises above the
countertop.
Peninsula Installations: Minimum 6" (152)
clearance to side walls and minimum 12"
(305) clearance to rear wall that rises above
the countertop.
Refer to the Installation Specifications
illustration for your model on pages 7–9 for
the exact rough opening dimensions.
6
WOLF SEALED BURNER RANGETOP
MINIMUM CLEARANCES
IMPORTANT NOTE: Caution must be used
in planning the proper installation of the Wolf
s
ealed burner rangetop to avoid fire or
damage to adjacent cabinetry or kitchen
equipment. Be sure to follow the minimum
c
learances established in the finished rough
opening dimensions.
Refer to the Installation Specifications
illustration for your model on pages 7–9 for
the exact rough opening dimensions.
WALL INSTALLATIONS
Minimum clearances to combustible
surfaces:
Minimum 18" (457) clearance from bottom
of upper cabinet to countertop, within 6"
(152) minimum side clearance.
Minimum spacing between overhead side
cabinets must be greater than or equal to
the nominal width of the rangetop. The
maximum depth of overhead and side
cabinets is 13" (330), within 6" (152) side
clearance.
0" (0) clearance for adjacent combustible
materials below the countertop, both sides
and rear.
Bottom of ventilation hood must be 30"
(762) minimum to 36" (914) maximum fr
om
countertop.
Minimum clearances for sealed bur
ner
rangetops without a ventilation hood:
Model SR
T304: 30" (762) minimum vertical
distance from counter
top to combustible
materials above the rangetop.
All Other Sealed Burner Rangetops:
Surface Bur
ners or Griddle (G) Models:
36" (914) minimum vertical distance from
countertop to combustible materials above
the rangetop.
Charbroiler (C) Models: 44" (1118) minimum
ver
tical distance fr
om counter
top to
combustible materials above the rangetop.
Failure to locate the rangetop without
the proper clearances will result in a fire
hazard.
RISER REQUIREMENTS
Installations against a combustible surface:
Model SRT304: No riser requirements.
36" (914) Sealed Burner Rangetops: A
minimum 5" (127) riser is required when
installing Model SR
T366 against a
combustible sur
face. A minimum 10" (254)
riser is required for all charbroiler (C) or
griddle (G) models installed against a
combustible sur
face.
48" (1219) Sealed Burner Rangetops: A
minimum 10" (254) riser is required for all
charbroiler (C) or griddle (G) models
installed against a combustible surface.