User Guide

45
Dimensions are in inches with millimeters
in parentheses unless otherwise specified.
As the reveal between cabinets and the
Integrated unit decreases, the potential
exists for severe finger pinching or crushing
if a hand or fingers are placed in the
opening when the door is closing.
When
3
/4" (19) or thicker panels are used
and a reveal less than
1
/4" (6) is maintained,
the door panels may cause damage to the
Sub-Zero unit when the door is open at the
maximum 105˚ stop. You should use the
built-in 90˚ stop to prevent damage.
26
13
16
(681)
26
13
16
(681)
3
4
(19)
PANEL
3
4
(19)
PANEL
DOOR
SUB-ZERO
UNIT
DOOR
SUB-ZERO
UNIT
54
(1372)
TO BACK
OF UNIT
24
(610)
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
CABINETRY
OR SIDE
PANEL
25
(635)
CABINETRY
OR SIDE
PANEL
25
(635)
3
4
(19)
PANEL
3
4
(19)
PANEL
DOOR
SUB-ZERO
UNIT
DOOR
SUB-ZERO
UNIT
72
(1829)
TO BACK
OF UNIT
24
(610)
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
1
8
(3)
REVEAL
min
*
*SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL
CABINETRY
OR SIDE
PANEL
25
(635)
CABINETRY
OR SIDE
PANEL
25
(635)
35
13
16
(910)
35
13
16
(910)
36" (914)
WIDE MODELS
Panel width dimen-
sions for installation
of two 36" (914)
wide tall units side
by side.
Dimensions are based
on a
1
/ 8 " (3) reveal. A
reveal of up to
1
/ 4 " (6)
is possible, but panel
dimensions need to be
adjusted accordingly.
27" (686)
WIDE MODELS
Panel width dimen-
sions for installation
of two 27" (686)
wide tall units side
by side.
Dimensions are based
on a
1
/ 8 " (3) reveal. A
reveal of up to
1
/ 4 " (6)
is possible, but panel
dimensions need to be
adjusted accordingly.
PANEL
REQUIREMENTS
Door and drawer
panels must be a
minimum of
5
/8" (16)
thick.
The door panel
cannot exceed 40 lbs
(18 kg) and each
drawer panel must
not exceed 12 lbs
(5 kg) for 27" (686)
wide units. For 36"
(914) wide units, the
door panel weight
limit is 53 lbs (24 kg)
and 16 lbs (7 kg) for
each drawer panel.