Design Guide REVISED 3/2022
Design Guide Contents 3 Classic Series Refrigeration 36 PRO Series Refrigeration 44 Designer Series Refrigeration 54 Wine Storage 88 Designer Undercounter Refrigeration 96 Undercounter Ice Maker 100 Sub-Zero Warranty Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified.
Classic Series Refrigeration Classic Series Refrigeration For Classic Series refrigeration, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lowerprofile hinges. Inside, new technology in food preservation makes Classic Series refrigeration nothing short of revolutionary.
Classic Series Refrigeration Classic Series Design Options FRAMED OVERLAY Choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille, and handle options are available. Custom overlay door panels can be combined with unique handle hardware for design flexibility. Shown with the pro handle option to complement Wolf ranges.
Classic Series Refrigeration Classic Series Design Options FLUSH INSET STAINLESS STEEL The flush inset design option allows for flush door and grille panels and custom handle hardware. Shown with the tubular handle option to match Wolf built-in ovens. The flush inset application is an overlay model with flush inset panels. Customize with panel, grille, and handle options. Stainless steel models require no customization. To complement the look of Wolf ranges, choose the pro handle option (shown).
Classic Series Refrigeration Overall Dimensions ALL REFRIGERATOR / ALL FREEZER OVER-AND-UNDER 26 3/16" (665) 36" (914) 26 3/16" (665) 30" (762) 84" 84" (2134) (2134) 73 3/4" 50 3/4" (1873) (1289) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" 4" (102) 23 7/8" (606) (606) 14 1/8" (359) 12 1/8" (308) 23 5/8" 37 1/4" (600) (946) 311/4" (796) 2 3/8" (60) 2 3/8" (60) Model BI-36R, BI-36RG, BI-36F IMPORTANT NOTE: Overall dimen
Classic Series Refrigeration Overall Dimensions OVER-AND-UNDER 26 3/16" (665) 36" (914) 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) (584) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" (606) 14 1/8" (359) (600) 23 7/8" (606) 23 7/8" (606) 23 5/8" 4" (102) 8" (203) 191/2" 23 5/8" 37 1/4" (495) (946) (600) 2 3/8" (60) 2 3/8" (60) Model BI-36U(ID), BI-36UG Model BI-36UFD(ID) subze
Classic Series Refrigeration Overall Dimensions OVER-AND-UNDER SIDE-BY-SIDE 26 3/16" (665) 42" (1067) 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 50 3/4" (1289) 73 3/4" (1873) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) (606) 7 1/4" (184) 9" (229) 23 5/8" (600) 8 3/4" (222) 221/4" (565) 221/4" (565) 2 3/8" (60) 2 3/8" (60) Model BI-42UFD(ID) IMPORTANT NOTE: Overall dimensions are based on stai
Classic Series Refrigeration Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) 42" (1067) 84" 84" (2134) (2134) 73 3/4" 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 26 3/16" (665) 48" (1219) (1873) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) 7 1/2" (191) 10 3/8" (264) (606) 8 3/8" (213) 11 5/8" (295) 26 1/4" 30" (668) (762) 2 3/8" (60) Model BI-42S(ID), BI-42SD 23 7/8" (606) 2 3/8" (60) Model BI-48S(ID), BI-48SD subzero.
Classic Series Refrigeration Opening Dimensions STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W OPENING WIDTH TYPICAL FILLER W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Classic Series Refrigeration Opening Dimensions FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 5 11/16" 3 1/2" 2 3/16" (56) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW CLEAT 3/4" (19) TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W CLEAT FILLER 3/4" (19) TYPICAL W FLUSH INSET WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visible a
Classic Series Refrigeration Opening Dimensions DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" W OPENING WIDTH (2127) OPENING HEIGHT TYPICAL FILLER W FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Classic Series Refrigeration Opening Dimensions DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH (56) CLEAT 5 11/16" 3 1/2" 2 3/16" 3/4" (19) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) CLEAT 5 11/16" 3 1/2" (89) (145) FINISHED RETURN W 84" FLUSH INSET WIDTH (2134) FLUSH INSET HEIGHT SIDE VIEW FILLER 3/4" (19) TYPICAL W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be vi
Classic Series Refrigeration Electrical Requirements Plumbing Requirements The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. Locate the water supply line within the shaded area shown in the illustration below.
Classic Series Refrigeration Custom Panels For all models excluding stainless steel, door panels and handles must be provided. Refer to Panel Requirements below and the charts on pages 18–23 for custom panel dimensions for your specific design application. IMPORTANT NOTE: Do not cover a glass door with a solid panel. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
Classic Series Refrigeration Custom Panels PARTIAL FRAMED OPTION PANEL MOUNTING KIT The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero. com.
Classic Series Refrigeration Custom Panels FLUSH INSET PANELS ICE AND WATER DISPENSER The flush inset application is an overlay model with flush inset panels. It is not a separate model. For models BI-42SD and BI‑48SD, the refrigerator door panel must include a cutout to accommodate the external dispenser. The bezel will accommodate a 1/4" (6) thick panel for framed applications and a 3/4" (19) thick panel for overlay and flush inset applications.
Classic Series Refrigeration Framed Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A H H W W W W W BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel H H BI-36RG H H H H H H W H 69 9/16" (1767) W 35 3/4" (908) H H H H H H 8 15/16" (227) A B B B A A 10 5/16" (262) W W W W Door Panel FREEZER Drawer Panel GRILLE (OPTIONAL) Grille Panel H H H
Classic Series Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Framed Panel Dimensions HH HH HH HH AA BB WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW WW BI-42SD, BI-48SD MODEL BI-36S MODEL BI-48S, BI-48SID, BI-48SD REFRIGERATOR Door Panel W H 19 13/16" (503) 69 9/16" (1767) FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel W H 15 7/16" (392) 69 9/16" (1767) W H 35 3/4" (908) 8 15/16" (227) REFRIGERATOR Door Panel FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-
Classic Series Refrigeration Overlay Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A H H W W W W W BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Overlay Panel Spacer Panel Backer Panel H H H H H GRILLE Overlay Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W W W H H H Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE
Classic Series Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Overlay Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR HH Overlay Panel Spacer Panel Backer Panel HH W H 25 1/16" (637) 24 3/16" (614) 24 13/16" (630) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER Overlay Panel Spacer Panel Backer Panel AA BB W H 16 11/16" (424) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE WW WW BI-36S, BI-42S(ID), BI-48S(ID
Classic Series Refrigeration Flush Inset Panel Dimensions H H H H H H H B A H H H H AH A A A A H H H H H H H H B A H AH AH H A AH A H H H H AH A H H W W W W W B BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel H H H H H GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W W W H H H Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Pane
Classic Series Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Flush Inset Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR HH Flush Inset Panel Spacer Panel Backer Panel HH W H 259/16" (649) 243/16" (614) 2413/16" (630) 693/4" (1772) 6815/16" (1751) 699/16" (1767) FREEZER Flush Inset Panel Spacer Panel Backer Panel AA BB W H 173/16" (437) 1513/16" (402) 167/16" (418) 693/4" (1772) 6815/16" (1751) 699/16" (1767) GRILLE WW WW BI-36S, BI-42S(ID), BI-48S(ID)
Classic Series Refrigeration TOP VIEW BACKER SPACER PANEL OFFSET 5/16" (8) 5/8" (16) The illustrations provide panel offsets and reveals for Classic Series models in a flush inset application. Refer to 5/16" (8) the chart below for reference to the illustrations.
Classic Series Refrigeration Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. A custom filler strip is required when installing two French door or side-by-side models.
Classic Series Refrigeration Dual Flush Inset Panel Dimensions H H H H H H H H H H H H A AH AH A A A H H H H B B B A H H A AH H H H A AH AH A A A H H H H H H W W W W BI-36R, BI-36F B REFRIGERATOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel H H GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W H H W W W W WW REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Ins
Classic Series Refrigeration TOP VIEW BACKER SPACER DUAL FLUSH INSET PANEL OFFSET 5/16" (8) 5/8" (16) ALL REFRIGERATOR / ALL FREEZER OVER-AND-UNDER Door (hinge) / Drawer / Grille Sides Door (handle) Sides Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom 5/16" (8) 1/2" (13) BACKER CABINETRY SPACER GRILLE ILLUS 1/2" (13) DOOR TOP VIEW TOP VIEW 5/CABINETRY 8" (16) 5/16" (8) 5/16" (8) 1/8" (3) DOOR BACKER 1/8" (3) DOOR DOOR DOOR 1/4" (6) TOP VIEW REVEAL DUAL T
Classic Series Refrigeration Dual Installation DUAL WIDE GRILLE DUAL WIDE GRILLE—FLUSH INSET A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. TWO 30" MODELS For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 84" (2134) finished height.
Classic Series Refrigeration Side Panel Standard Handles The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
Classic Series Refrigeration Framed Panels FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL 1/4" (6) FRAMED PANEL DOOR Framed panel thickness 30 | Sub-Zero Customer Care 800.222.
Classic Series Refrigeration Overlay / Flush Inset Panels FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 1" 2" (25) (51) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .10" (3) SPACER PANEL 1/4" (6) BACKER PANEL DOOR Overlay and flush inset panel thickness subzero.
Classic Series Refrigeration Overlay Application FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view) 32 | Sub-Zero Customer Care 800.222.
Classic Series Refrigeration Flush Inset Application FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 110° door opening (top view) subzero.
Classic Series Refrigeration FILLER STRIP 11/4" (32) APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation FULL-SCALE TEMPLATE Typical framed, overlay, or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view) 34 | Sub-Zero Customer Care 800.222.
Classic Series Refrigeration FILLER STRIP 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE Dual Flush Inset Installation DOOR CLOSED DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual flush inset installation (top view) subzero.
PRO Series Refrigeration PRO Series Refrigeration Freshness finds unmistakable expression with Sub-Zero PRO Series refrigeration. A monument to food preservation— equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. Available in 36" and 48" widths, with a glass or solid door, and may be either built in or freestanding. 36 | Sub-Zero Customer Care 800.222.
PRO Series Refrigeration Overall Dimensions 36" MODEL 25 7/8" (657) 36" (914) 84" 42 1/8" (2134) (1070) 30 1/2" (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" (606) 26" (660) 26" 37 3/8" (660) (949) 2 3/8" (60) Model PRO3650 / PRO3650G subzero.
PRO Series Refrigeration Overall Dimensions 48" MODEL 25 7/8" (657) 48" (1219) 84" 42 1/8" (2134) (1070) 30 1/2" (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" 23 7/8" (606) (606) 21" (533) 26" (660) 30 3/4" (781) 14 1/2" (368) 2 3/8" (60) Model PRO4850 / PRO4850G 38 | Sub-Zero Customer Care 800.222.
PRO Series Refrigeration Opening Dimensions STANDARD / FLUSH INSTALLATION D 3/4" (19) OPENING DEPTH 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN W H W OPENING WIDTH OPENING HEIGHT TYPICAL FILLER FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry.
PRO Series Refrigeration Opening Dimensions DUAL STANDARD / FLUSH INSTALLATION D 3/4" (19) OPENING DEPTH 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN W H OPENING WIDTH OPENING HEIGHT TYPICAL FILLER W FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry.
PRO Series Refrigeration Dual Installation Electrical Requirements If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
PRO Series Refrigeration Plumbing Requirements Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves. The water supply line must not interfere with the installation of the anti-tip bracket.
PRO Series Refrigeration Standard Handles Optional stainless steel pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for PRO Series models. HANDLE LENGTH 36" MODEL 48" MODEL Door 2711/16" (703) 2711/16" (703) Refrigerator Drawer 263/16" (665) 1915/16" (506) Freezer Drawer 263/16" (665) 119/16" (294) subzero.
Designer Series Refrigeration Designer Series Refrigeration With custom front panels and hardware, Sub-Zero Designer Series columns, tall, and drawer wine models disappear into the decor. Units fit flush with cabinetry, making Designer Series refrigeration as practical and beautiful in the master suite, bar, or theatre room as in the kitchen. Drawer model ID-24RO, approved for outdoor installations, is ideal for any outdoor kitchen.
Designer Series Refrigeration Overall Dimensions COLUMN COLUMN W 24" (610) 4 1/2" (114) 69 1/2" (2134) *HEIGHT DIMENSION ± 1/2" (13) A B 18" Column 18" (457) 21/2" (64) 161/2" (419) 24" Column 24" (610) 4" (102) 221/2" (572) 30" Column 30" (762) 55/8" (143) 281/2" (724) 36" Column 36" (914) 71/4" (184) 341/2" (876) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 84"* (1765) W 3 5/8" (92) A 1 3/4" (45) B subzero.
Designer Series Refrigeration Overall Dimensions TALL TALL W 24" (610) W A B 30" Tall 30" (762) 55/8" (143) 281/2" (724) 36" Tall 36" (914) 71/4" (184) 341/2" (876) 4 1/2" (114) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 44 7/8" 84"* (1140) (2134) 3/8" (10) 13 5/16" (338) 3/8" (10) 10 9/16" (268) *HEIGHT DIMENSION ± 1/2" (13) 3 5/8" (92) A 1 3/4" (45) 17 3/4" (451) B 46 | Sub-Zero Customer Care 800.222.
Designer Series Refrigeration Overall Dimensions DRAWER DRAWER W 1/4" (6) 24" (610) 13 5/16" (338) 3/8" (10) 34 1/2"* 24" Drawer 24" (610) 27" Drawer 27" (686) 30" Drawer 30" (762) 36" Drawer 36" (914) (876) 10 9/16" (268) *HEIGHT DIMENSION ± 1/2" (13) W IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 3 5/8" (92) 17 3/4" (451) subzero.
Designer Series Refrigeration Opening Dimensions DESIGNER SERIES OPENING DIMENSIONS COLUMN / TALL 18" Column 24" Column 30" Column / Tall 36" Column / Tall 25" (635) OPENING DEPTH 25 3/4" (654) FOR OUTDOOR MODEL DRAWER TOP VIEW 24" Drawer 27" Drawer 30" Drawer 36" Drawer W H 18" (457) 24" (610) 30" (762) 36" (914) 84" (2134) 84" (2134) 84" (2134) 84" (2134) W H 24" (610) 27" (686) 30" (762) 36" (914) 341/2" (876) 341/2" (876) 341/2" (876) 341/2" (876) *For stainless steel side panel accessory
Designer Series Refrigeration Electrical Requirements Plumbing Requirements Installation must comply with all applicable electrical codes. Installation must comply with all applicable plumbing codes. The electrical supply must be located within the shaded area shown in the illustration and chart below. A separate circuit servicing only this appliance is required. Locate the water supply line within the shaded area shown in the illustration below.
Designer Series Refrigeration Stainless Steel Panels The outdoor model requires the use of Sub-Zero stainless steel outdoor accessory panels. The thickness of indoor stainless steel panels is 3/4" (19) and outdoor stainless steel panels is 11/2" (38). The depth of each Designer Series model is 24" (610). Allow for panel thickness when planning the finished opening depth.
Designer Series Refrigeration Custom Panels Custom Panels TYPICAL PANEL DIMENSIONS DOOR PANEL HEIGHT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.
Designer Series Refrigeration Custom Panels Standard Handles TOE KICK CLEARANCE Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For indoor models only, the height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
Designer Series Refrigeration Maximum Door Opening FULL-SCALE TEMPLATE As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop. 3/4" (19) PANEL DOOR OPEN MAXIMUM 105° 1/8" (3) REVEAL POTENTIAL INTERFERENCE DOOR CLOSED 3/4" (19) PANEL ADJACENT CABINETRY POTENTIAL INTERFERENCE 0" 1" (25) SCALE Maximum door opening (top view) subzero.
Wine Storage Wine Storage Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home. WINE STORAGE MODELS DEU2450W DEC1850W BW-30 54 | Sub-Zero Customer Care 800.222.
Wine Storage Overall Dimensions MODEL DEU2450W 23 1/8" (587) 24" (610) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 34 1/2" (876) HEIGHT DIMENSIONS ± 1/2" (13) 9 5/8" (245) 26 1/2" (673) subzero.
Wine Storage Opening Dimensions MODEL DEU2450W The depth of each model is 231/8" (587). Allow for panel thickness when planning the finished opening depth. A minimum 31/2" (89) finished return is required on all sides of the opening. Framed cabinets require additional finished filler material behind the face frame for a proper installation. Refer to the illustration.
Wine Storage Dual Installation MODEL DEU2450W If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
Wine Storage Overall Dimensions COLUMN COLUMN WINE W 24" (610) 4 1/2" (114) 69 1/2" (2134) *HEIGHT DIMENSION ± 1/2" (13) 3 5/8" (92) A 1 3/4" (45) B 58 | Sub-Zero Customer Care 800.222.7820 A B 18" Column 18" (457) 21/2" (64) 161/2" (419) 24" Column 24" (610) 4" (102) 221/2" (572) 30" Column 30" (762) 55/8" (143) 281/2" (724) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.
Wine Storage Overall Dimensions TALL TALL WINE W 24" (610) 4 1/2" (114) 44 7/8" 30" Tall W A B 30" (762) 55/8" (143) 281/2" (724) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 84"* (1140) (2134) 3/8" (10) 13 5/16" (338) 3/8" (10) 10 9/16" (268) *HEIGHT DIMENSION ± 1/2" (13) 3 5/8" (92) A 1 3/4" (45) 17 3/4" (451) B subzero.
Wine Storage Opening Dimensions DESIGNER SERIES WINE STORAGE OPENING DIMENSIONS 25" (635) OPENING DEPTH W* 18" Column 18" (457) 24" Column 24" (610) 30" Column / Tall 30" (762) *For stainless steel side panel accessory, add 1" (25) per panel to opening width. TOP VIEW The depth of each model is 24" (610). Allow for panel thickness when planning the finished opening depth. A minimum 31/2" (89) finished return is required on all sides of the opening.
Wine Storage Overall Dimensions MODEL BW-30 26 3/16" (665) 30" (762) IMPORTANT NOTE: Overall dimensions are based on the stainless steel model. For flush inset applications, add 1/2" (13) to door clearance dimensions. 84" (2134) 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 23 7/8" (606) 17" (432) 311/4" (796) 2 3/8" (60) subzero.
Wine Storage Opening Dimensions MODEL BW-30 STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W TYPICAL FILLER W OPENING WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Wine Storage Opening Dimensions MODEL BW-30 FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 5 11/16" 3 1/2" 2 3/16" (56) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW CLEAT 3/4" (19) TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W CLEAT FILLER 3/4" (19) TYPICAL W FLUSH INSET WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visible and s
Wine Storage Opening Dimensions MODEL BW-30 DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W OPENING WIDTH TYPICAL FILLER W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Wine Storage Opening Dimensions MODEL BW-30 DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH (56) CLEAT 5 11/16" 3 1/2" 2 3/16" 3/4" (19) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) CLEAT 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W FLUSH INSET WIDTH FILLER 3/4" (19) TYPICAL W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visibl
Wine Storage Electrical Requirements Installation must comply with all applicable electrical codes. ELECTRICAL LOCATION—DESIGNER SERIES Locate the electrical supply within the shaded area shown in the illustration for your specific model. For Designer Series models, also refer to the chart. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Wine Storage Custom Panels Custom Panel—DEU2450W For all models excluding stainless steel, door panels and handles must be provided. Refer to the panel requirements and custom panel dimensions charts for your specific model and design application. For model DEU2450W, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes. Refer to the following charts for panel requirements and dimensions. Do not install a solid panel on a glass door unit.
Wine Storage Custom Panel—DEU2450W TOE KICK CLEARANCE MAXIMUM DOOR OPENING The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. For questions regarding the installation, call Sub‑Zero Customer Care at 800-222-7820. As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop.
Wine Storage Custom Panel—Designer Series For Designer Series models, custom door/drawer panels and handle hardware must be provided. Refer to the Panel Requirements chart and Typical Panel Dimensions. Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer. The thickness of the custom panel can vary.
Wine Storage Custom Panel—Designer Series TYPICAL PANEL DIMENSIONS DUAL INSTALLATION For dual installations, refer to the illustration for panel height and the chart below for panel width.
Wine Storage Custom Panels—Designer Series DOOR PANEL HEIGHT TOE KICK CLEARANCE The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
Wine Storage Custom Panel—BW-30 FRAMED FRAMED PANEL DIMENSIONS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1/4" (6), a filler material must be added to achieve a proper fit. If the panel is thicker than 1/4" (6), rout an edge around the panel or mount the custom panel on a sheet of 1/4" (6) thick material and insert into the channel.
Wine Storage Custom Panel—BW-30 OVERLAY OVERLAY PANEL DIMENSIONS Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel, and a 1/4" (6) backer panel. Refer to the illustrations below.
Wine Storage Custom Panel—BW-30 FLUSH INSET FLUSH INSET PANEL DIMENSIONS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel, and a 1/4" (6) backer panel. Refer to the illustrations for overlay panels on the previous page.
5/16" (8) Wine Storage 5/8" (16) TOP VIEW 1/2" (13) Custom Panel—BW-30 BACKER SPACER FLUSH INSET PANEL OFFSET CABINETRY 5/8" (16) DOOR A Grille Top B Grille Bottom / Door Top C Door Bottom D 1/2" (13) TOP VIEW DOOR CABINETRY 1/4" (6) 5/16" (8) 5/8" (16) GRILLE SIDE VIEW 5/16" (3) (8) GRILLE CABINETRY 5/32" 5/16" (4) (8) SIDE VIEW 5/16" (8) 1/2" (13) 1/8" (3) 1/4" (6) SIDE VIEW REVEAL DOOR GRILLE 5/16" (8) 5/32" (4) 5/16" (8) 1/2" (13) 1/2" (13) 3/32" 5/16" (2) (8) 1/8" 5S
Wine Storage Custom Panel—BW-30 DUAL INSTALLATIONS DUAL FLUSH INSET PANEL DIMENSIONS A dual installation kit may be required if two models BW-30 or a model BW-30 and a Classic Series unit are installed side by side. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units.
Wine Storage TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE BACKER SPACER DOOR CABINETRY DOOR TOP VIEW 5 /16" (8) Custom Panel—BW-30 DUAL FLUSH INSET PANEL 1/2" (13) 5/8" (16) OFFSET 1/8" (3) BACKER SPACER BACKER CABINETRY SPACER ILLUS Door (hinge) / Grille Sides A Door (handle) Sides B Grille Top Door Bottom GRILLE 1/4" (6) CABINETRY 1/2" (13) D E 1/8" 5/16" (3) (8) BACKER 1/2" (13) CABINETRY 5/8" SPACER (16) DOOR TOP VIEW DUAL TRIM 5/16" (8) 1/2" (13) DOOR DOOR TOP VIEW DOOR
Wine Storage Custom Panel—BW-30 SIDE PANEL 24" (610) The custom side panel must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations. When installing model BW-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available for an 84" (2134) finished height through an authorized Sub-Zero dealer.
Wine Storage Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for wine storage models.
Wine Storage Wine Rack Wood Facing MODEL DEU2450 DESIGNER SERIES / MODEL BW-30 The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale templates below for the profile dimensions of the wood facing and the charts for the width. The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry.
Wine Storage Framed Panel—BW-30 FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL 1/4" (6) FRAMED PANEL DOOR Framed panel thickness 82 | Sub-Zero Customer Care 800.222.
Wine Storage Overlay / Flush Inset Panels—BW-30 FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 1" 2" (25) (51) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .10" (3) SPACER PANEL 1/4" (6) BACKER PANEL DOOR Overlay and flush inset panel thickness subzero.
Wine Storage Overlay Application—BW-30 FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view) 84 | Sub-Zero Customer Care 800.222.
Wine Storage Flush Inset Application—BW-30 FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 110° door opening (top view) subzero.
Wine Storage FILLER STRIP 11/4" (32) APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation—BW-30 FULL-SCALE TEMPLATE Typical framed, overlay, or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view) 86 | Sub-Zero Customer Care 800.222.
Wine Storage FILLER STRIP 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE Dual Flush Inset Installation—BW-30 DOOR CLOSED DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual flush inset installation (top view) subzero.
Designer Series Undercounter Refrigeration Undercounter Refrigeration The Sub-Zero Designer Series Undercounter Refrigeration is a helpful addition to a master suite, bar, home office, or media room. Choose from an all refrigerator, combination with ice maker, beverage center or outdoor refrigerator. The design flexibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They are ready to be fitted with a custom or stainless steel panel.
Designer Series Undercounter Refrigeration Overall Dimensions DESIGNER SERIES UNDERCOUNTER MODELS 23 1/8" (587) 24" (610) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 34 1/2" (876) HEIGHT DIMENSIONS ± 1/2" (13) 9 5/8" (245) 26 1/2" (673) subzero.
Designer Series Undercounter Refrigeration Opening Dimensions DESIGNER SERIES UNDERCOUNTER MODELS DUAL INSTALLATION If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges.
Designer Series Undercounter Refrigeration Electrical Requirements Plumbing Requirements Locate the electrical supply within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. MODEL DEU2450CI IMPORTANT NOTE: For indoor models, a ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. For the outdoor model, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock.
Designer Series Undercounter Refrigeration Stainless Steel Panels Custom Panel Stainless steel panels and handles are available through an authorized Sub‑Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For all models, a door panel and handle must be provided. Refer to the following charts for panel requirements and dimensions. The depth of each model is 231/8" (587). Allow for panel thickness when planning the finished opening depth.
Designer Series Undercounter Refrigeration Custom Panel TYPICAL PANEL DIMENSIONS DUAL INSTALLATION For dual installations, refer to the chart below for typical panel dimensions. H H PANEL DIMENSIONS—DUAL INSTALLATION MODEL W Undercounter Model W W H 2313/16" (605) 303/8" (772) PANEL DIMENSIONS MODEL Undercounter Model STILES / RAILS Stiles Top Rail Bottom Rail W H 233/4" (603) 303/8" (772) MIN* 31/4" (83) 31/2" (89) 41/2" (114) *Glass door models only. subzero.
Designer Series Undercounter Refrigeration Custom Panel TOE KICK CLEARANCE MAXIMUM DOOR OPENING The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. For questions regarding the installation, call Sub‑Zero Customer Care at 800-222-7820. As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop.
Designer Series Undercounter Refrigeration Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for Designer Undercounter models. HANDLE LENGTH TUBULAR PRO 24" Model 243/16" (614) 221/2" (572) NA 221/2" (572) Outdoor Model subzero.
Undercounter Ice Maker Undercounter Ice Maker In the kitchen, bar, or media room, a Sub-Zero high-volume ice maker is a must for entertaining. The design flexibility of this compact unit allows it to fit in any room or outdoor kitchen. The indoor ice maker unit is ready to be fitted with a custom panel and handle or can be ordered with a stainless steel panel and handle. 96 | Sub-Zero Customer Care 800.222.
Undercounter Ice Maker Overall Dimensions Opening Dimensions ICE MAKER ICE MAKER 14 3/4" (375) 23" (584) 24" (610) OPENING DEPTH 33 5/8" (854) TOP VIEW 4" (102) 34 1/2" 15 1/4" (876) OPENING HEIGHT 18" (457) (387) OPENING WIDTH FRONT VIEW SIDE VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. 6" (152) 3/4" (19) 3 1/2" (89) FINISHED RETURN IMPORTANT NOTE: Overall dimensions do not include panels or handles.
Undercounter Ice Maker Electrical Requirements Plumbing Requirements Locate the electrical supply as shown in the illustration below. A separate circuit servicing only this appliance is required. For ease of installation, recess the water shut off into the wall or place it in an adjacent cabinet. Locate the water supply as shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves.
Undercounter Ice Maker Stainless Steel Panel Standard Handles A stainless steel panel and handle is available through an authorized Sub‑Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths.
Warranty Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certified Service, unless otherwise specified by Sub-Zero, Inc.
Warranty Sub-Zero Outdoor Limited Warranty* FOR RESIDENTIAL USE FULL ONE YEAR WARRANTY** For one year from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certified Service, unless otherwise specified by Sub-Zero, Inc.
SUBZERO.
