Design Guide

subzero.com/specs | 75
WINE STORAGE
Custom Panels—WS-30
SIDE PANEL
The custom side panel must be a minimum of 24" (610) deep
and
1
/2" (13) thick. Routing will be necessary for the side
panel to t ush against the side of the unit. Refer to the
illustrations below.
When installing model WS-30 with a custom side panel, an
accessory kit is required. Stainless steel and white enamel
side panels are available through an authorized Sub-Zero
dealer. For local dealer information, visit the nd a show-
room section of our website, subzero.com.
84"
(2134)
24" (610)
OPTIONAL
TOE KICK
CUT-OUT
4" (102)
1
7
/8"(48)
1" (25)
ROUT TO
1
/8" (3)
FRONT
OF SIDE
PANEL
2
5
/8"
(67)
MAIN
FRAME
SIDE PANEL
ROUTING
1" (25)
1
7
/8" (48)
1
/8" (3)
1
/2" (13)
Side panel dimensions.
Routing detail.
Handle Hardware
Optional stainless steel tubular and pro handles are avail-
able through an authorized Sub-Zero dealer. For local dealer
information, visit the nd a showroom section of our
website, subzero.com.
Refer to the chart below for the length and stud spacing of
standard handles for wine storage models.
STANDARD HANDLES
315W, 424G, 424FSG LENGTH STUD SPACING
Tubular 24
3
/16" (614) 16
1
/4" (413)
Pro 21" (533) 19
11
/16" (500)
427RG (DRAWER) LENGTH STUD SPACING
Tubular 24
3
/16" (614) 16
1
/4" (413)
Pro 21" (533) 19
11
/16" (500)
427G, 427RG (DOOR) LENGTH STUD SPACING
Tubular 41
3
/16" (1046) 33
1
/4" (845)
Pro 39
9
/16" (1006) 38
5
/16" (973)
WS-30 LENGTH STUD SPACING
Tubular 63
7
/8" (1622) 43
7
/8" (1114)
Pro 45
3
/16" (1147) 43
7
/8" (1114)
INTEGRATEDBUILT-IN WINE UNDERCOUNTERPRO 48