Owners Manual
subzero.com
|
9
Troubleshooting
ICE PRODUCTION (MODEL UC-24CI)
No ice.
• Verify the ice maker has been on for at least 24 hours.
• Verify the freezer temperature is near 0°F.
• Verify the ice container is properly installed.
• Verify the ice maker arm is in the down position.
• Verify water is being supplied to the unit.
Blue or green ice.
• Possible copper supply line corrosion. Contact a
plumber to clean or replace.
Black ecks in the cubes.
• Stop use and contact Sub-Zero Factory Certied
Service.
Bad taste.
• Defrost the freezer and clean with soap and water.
• Place coffee grounds or charcoal briquettes in the
freezer to absorb odor.
Hollow cubes.
• Clean the condenser. Contact Sub-Zero Factory Certied
Service if unresolved.
TROUBLESHOOTING
SERVICE
• Maintain the quality built into your product by contacting
Sub-Zero Factory Certied Service. For the name of the
nearest Sub-Zero Factory Certied Service, check the
Support and Service section of our website, subzero.com
or call Sub-Zero Customer Care at 800-222-7820.
• When contacting service, you will need the model and
serial number of your unit. Both numbers are listed on
the product rating plate. Refer to page 4 for rating plate
location.
• For warranty purposes, you will also need the date
of installation and name of your authorized Sub-Zero
dealer. This information should be recorded on page 3.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.