Design Guide

subzero.com | 95
Custom Panel
For overlay Undercounter models, a custom door panel
and handle hardware must be provided. Refer to the charts
for panel requirements and dimensions.
Finish all sides of the custom panels. They may be visible
when the door is open or through the window of glass
door models.
PANEL REQUIREMENTS
WEIGHT PER PANEL MAX
UC-24R, UC-24C(I) 20 lb (9 kg)
UC-24BG 10 lb (5 kg)
UC-15I(P) 15 lb (7 kg)
PANEL THICKNESS MIN
All Panels ⁄" (16)
MODEL UC-24BG
For model UC-24BG, the custom door panel will attach
directly to the door frame with screws through a series of
pre-drilled holes.
Do not install a solid panel on a glass door unit. A solid
door is available as a sales accessory and must be installed
if a solid panel is specified. Service may be required to
install the door. Contact an authorized Sub-Zero dealer
for more information. Overall dimensions are the same for
glass and solid door panels.
OVERLAY PANEL DIMENSIONS
H
W
H
W
AA
A
A
PANEL DIMENSIONS
MODEL W H
24" Model 23⁄" (603) 30⁄" (764)
Ice Maker 15" (381) 30⁄" (772)
STILES / RAILS A
UC-24BG 2⁄" (57) min
DOOR CLEARANCE
Undercounter models can be installed flush with surround-
ing cabinetry. Depending on the thickness of the custom
door panel, it may be necessary to install the unit ⁄"
(6)
beyond the front surface of adjacent cabinetry to prevent
interference when the door is opened to 145°. Refer to the
full-scale template on page 99.
UC-24R, UC-24C(I),
UC-15I(P)
UC-24BG
Undercounter Refrigeration