User Guide
25
Dimensions in parentheses are in
millimeters unless otherwise specified.
WOLF INTEGRATED MODULES
E
6"
(152)
15"
(381)
15"
(381)
2"*min (51)
CUT-OUT TO
COMBUSTIBLE
MATERIALS
(BOTH SIDES)
13
3
/8" (340)
COOKTOP CUT-OUT
WIDTH
13
3
/8" (340)
COOKTOP CUT-OUT
WIDTH
33" (838)
RECOMMENDED
CABINET WIDTH
18"
(457)
NOTE: Application shown allows for installation of two 15" (381) modules side-by-side with 33" (838) recommended cabinet width. 18" (457)
recommended cabinet width for installation of single 15" (381) cooktop or module. *Minimum clearance from both side edges of cooktop cut-ou
t
to combustible materials up to 18" (457) above countertop. **Minimum clearance from rear edge of cooktop cut-out to combustible materials up
to 18" (457) above countertop.
19
1
/4" (489)
COOKTOP CUT-OUT
DEPTH
2
1
/2"min
(64)
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
13" max
(330)
30" (762)
COUNTERTOP TO
COMBUSTIBLE
MATERIALS
ABOVE COOKTOP
FRONT OF COUNTERTOP
2
1
/2"min
(64)
19
1
/4" (489)
COOKTOP
CUT-OUT DEPTH
2"**
(51)
INSTALLATION SPECIFICATIONS
Model CT15I/S
Countertop Cut-Out Dimensions
SPECIFICATIONS
Model CT15I/S
Induction Cooktop
Trim Finish Classic
Overall Width 15" (381)
Overall Height 2
1
/2" (64)
Overall Depth 21" (533)
Heating Elements Two
Max Element Power 1800 W
(front)
Max Element Power 2200 W
(rear)
Cabinet Depth 22
3
/4" (578) min
Height Clearance 6" (152) min
Cut-Out Width* 13
3
/8" (340)
Cut-Out Depth 19
1
/4" (489)
Electrical Supply 240/208 V AC, 60 Hz
20 amp dedicated circuit
Conduit 4' (1.2 m) flexible 3-wire
Electrical Rating 3.4 kW at 240 V
2.6 kW at 208 V
Shipping Weight 30 lbs (14 kg)
*If the induction cooktop is to be used with
any combination of additional cooktop units or
modules with a filler strip, the cut-out width
increases to 14" (356).
IMPORTANT NOTE: A minimum height clearance
of 6" (152) is required. If a shelf is installed
below the unit, a 1" (25) gap at the rear of the
cabinet shelf is necessary to allow for proper
ventilation. Failure to do so could result in
decreased performance or product damage.
Unit dimensions may vary to ±
1
/
8
" (3).
PLANNING INFORMATION
The illustrations provide the overall dimensions
and finished cut-out dimensions that you need
to plan for in your installation. We have mini-
mized the information contained in the illustra-
tions, concentrating on the critical information
you must plan into your installation.
IMPORTANT NOTE: When multiple cooktops or
modules are installed side by side, refer to page
23 for countertop cut-out dimensions.
The induction cooktop can accommodate a
Wolf cooktop hood, downdraft system or Pro
ventilation hood or hood liner. When installing a
ventilation hood, refer to the specific require-
ments of the hood for the minimum dimension
to the countertop. Refer to pages 72–91 for
ventilation specifications.
ELECTRICAL REQUIREMENTS
The Wolf induction cooktop requires a separate,
grounded 3-wire 240/208 V AC, 60 Hz, 20 amp
service with its own circuit breaker. Locate
electrical within the shaded area shown in the
illustration.
You must follow all National Electrical Code
regulations. In addition, be aware of local codes
and ordinances when installing your service.
INSTALLATION
Refer to installation
instructions shipped
with each Wolf
product for detailed
specifications.