User Guide

42
WOLF WARMING DRAWERS
SPECIFICATIONS
Model WWD30 with
Stainless Steel Drawer Front
Overall Width 29
7
/8" (759)
Overall Height 10
1
/4" (260)
Overall Depth 23
1
/16" (586)
(behind frame)
Rec Cabinet Width 33" (838)
Min Cabinet Width 30" (762)
Min Cabinet Depth 24" (610)
Min Base Support 200 lbs (91 kg)
Opening Width 28
1
/2" (724)
Opening Height 9
1
/8" (232)
Opening Depth 23
1
/2" (597)
Electrical Supply 120 V AC, 60 Hz
15 or 20 amp circuit
Heating Element 850 W
Power Cord 3' (.9 m) 3-prong
Shipping Weight 75 lbs (34 kg)
Unit dimensions may vary to ±
1
/ 8 " (3).
INSTALLATION
OPTIONS
Model WWD30 with stain-
less steel drawer front may
be installed above or below
a Wolf 30" (762) single or
double oven, or below an
electric or gas cooktop,
provided the warming
drawer is fully enclosed,
top and bottom, with a
minimum base support of
200 lbs (91 kg). Refer to the
built-in oven and cooktop
sections for additional spec-
ifications. It may also be
installed next to or above
another Model WWD30.
Model WWD30 with stain-
less steel drawer front may
be installed in combination
with a 30" (762) single oven
and microwave oven with
30" (762) trim. Refer to the
illustrations on pages 37
and 39.
Refer to the installation
instructions provided with
the stainless steel drawer
front for detailed specifica-
tions. These instructions
can also be found on our
website, wolfappliance.com.
Dimensions will vary
according to the specific
installation.
28
5
/8" (727)
OPENING WIDTH
E
5"
(127)
4"
(102)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
24" min (610)
CABINET DEPTH
9
1
/8" (232)
OPENING
HEIGHT
23
7
/8" min (606)
OPENING DEPTH
2"(51) x 2"(51)
ANTI-TIP BLOCK
DIMENSION
WILL VARY*
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
*Allow enough room for placement of anti-tip block and drawer face overlap.
INSTALLATION SPECIFICATIONS
Model WWD30 with Stainless Steel Drawer Front
Undercounter Installation
28
1
/2" (724)
33" (838)
RECOMMENDED CABINET WIDTH
30"min (762)
28
5
/8" (727)
WARMING DRAWER
OPENING WIDTH
E
5"
(127)
4"
(102)
ALLOW FOR
5
/8" (16)
OVERLAP OF
DRAWER FACE
ON ALL SIDES
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
30-INCH OVEN
ROUGH OPENING
PLATFORM APPLICATION
24"min (610)
CABINET DEPTH
7
/8"
(22)
9
1
/8" (232)
OPENING
HEIGHT
23
7
/8"min (606)
OPENING DEPTH
27
3
/16"
(691)
24"min
(610)
7
/8" (22)
PLATFORM
24"min (610)
CABINET DEPTH
2
3
/8"
(60)
ANTI-TIP BLOCK APPLICATION
9
1
/8" (232)
OPENING
HEIGHT
23
7
/8"min (606)
OPENING DEPTH
27
3
/16"
(691)
24"min
(610)
2"(51) x 2"(51)
ANTI-TIP BLOCK
Installation below 30" Built-In Single Oven