User Guide

43
Dimensions in parentheses are in
millimeters unless otherwise specified.
INSTALLATION SPECIFICATIONS
Model WWD30 with Integrated Drawer Front
Undercounter Installation
SPECIFICATIONS
Model WWD30 with
Integrated Drawer Front
Overall Width 29
3
/8" (746)
Overall Height 10
1
/8" (257)
Overall Depth 23
1
/2" (597)
(behind frame)
Min Cabinet Width 33" (838)
Min Cabinet Depth
Overlay 24" (610)
Inset 25" (610)
Min Base Support 200 lbs (91 kg)
Opening Width 29
1
/2" (749)
Opening Height 10
1
/4" (260)
Opening Depth* 24" (610)
Min Panel Size (W x H)
Overlay 30" (762) x 10
3
/8" (264)
Inset 29
3
/8" (746) x 10
1
/8" (257)
Min Panel Thickness
5
/8" (16)
Electrical Supply 120 V AC, 60 Hz
15 or 20 amp circuit
Heating Element 850 W
Power Cord 3' (.9 m) 3-prong
Shipping Weight 75 lbs (34 kg)
*For inset application, add thickness of drawer face
to opening depth.
Unit dimensions may vary to ±
1
/ 8 " (3).
WOLF WARMING DRAWERS
INSTALLATION
OPTIONS
Model WWD30 with inte-
grated drawer front may be
installed above or below
any Wolf built-in oven, or
below an electric or gas
cooktop, provided the
warming drawer is fully
enclosed, top and bottom,
with a minimum base
support of 200 lbs (91 kg).
Refer to the cooktop and
oven sections for additional
specifications. It may also
be installed next to or
above another Model
WWD30.
Model WWD30 with inte-
grated drawer front may be
installed in combination
with a 30" (762) or 36" (914)
single oven and microwave
oven with 30" (762) or 36"
(914) trim. Refer to page 37.
Refer to the installation
instructions provided for
detailed specifications.
These instructions can also
be found on our website,
wolfappliance.com.
25" min (635)
CABINET DEPTH
29
1
/2" (749)
OPENING WIDTH
E
5"
(127)
4"
(102)
33" (838)
MINIMUM CABINET WIDTH
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
*Allow enough room for placement of anti-tip block.
24" (610) + THICKNESS
OF DRAWER FACE
FOR OPENING DEPTH
DIMENSION
WILL VARY*
10
1
/4"
(260)
OPENING
HEIGHT
9
7
/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
29
1
/2" (749)
OPENING WIDTH
E
5"
(127)
4"
(102)
33" (838)
RECOMMENDED CABINET WIDTH
30" min (762)
36" (914)
STANDARD
FLOOR TO
COUNTER
HEIGHT
5" min (127)
BOTTOM
OF OPENING
TO FLOOR
24" min (610)
CABINET DEPTH
24" min (610)
OPENING DEPTH
ALLOW FOR
OVERLAP OF
DECORATIVE
DRAWER FACE
ON ALL SIDES**
DIMENSION
WILL VARY*
*Allow enough room for placement of anti-tip block and drawer face overlap.
**Overlap of decorative drawer face will vary depending on the size of the custom panel.
10
1
/4"
(260)
OPENING
HEIGHT
9
7
/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
NOTE: Refer to the built-in 30" (762) single oven specifications for electrical location.
29
1
/2" (749)
WARMING DRAWER
OPENING WIDTH
28
1
/2" (724)
30-INCH OVEN
OPENING WIDTH
33" (838)
CABINET WIDTH
E
5"
(127)
4"
(102)
OVERLAY APPLICATION
27
3
/16"
(691)
24"min
(610)
24" min (610)
OPENING DEPTH
24" min (610)
CABINET DEPTH
1
1
/2"min*
(38)
10
1
/4"
(260)
OPENING
HEIGHT
9
7
/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
INSET APPLICATION
27
3
/16"
(691)
24"min
(610)
24" (610) + THICKNESS
OF DRAWER FACE
FOR OPENING DEPTH
25" min (635)
CABINET DEPTH
1
1
/2"min*
(38)
10
1
/4"
(260)
OPENING
HEIGHT
9
7
/8"(251)
2"(51) x 2"(51)
ANTI-TIP BLOCK
*Dimension may increase depending on the size of the drawer front panel.
Installation below 30" Built-In Single Oven
Inset Application
Overlay Application