- Robin Generator Service Manual

9-4-29 CONNECTION OF COUPLER AND PLUG

(1) Connect th

coupler (6P) from the generator with the coupler thrusting from the control

planel.

(2) Connect the coupler (4P) thrusting from the AVR with the coupler (4P) thrusting from the

control panel.

(3) Connect the plug for grounding.

9-4-30 CONTROL PANEL

(1) Thrust the control lever through the control panel and secure it with four M5 x 8 screws.

(2) Set the knob on the control lever.

Note: After the coupler and plug have been connected and secured to the control panel, secure

the wire with the receptacle clamp on the control panel.

Fig. 94-28

-65-