Portable Generator User Manual

– 37 –
5-3-25 DRIVE SHAFT and FAN
Using a special tool “DRIVE SHAFT HOLDER” to hold
the drive shaft, loosen the four M8 bolts to remove the
Drive Shaft and Fan from the flywheel.
M8 x 27mm Flange bolt : 4pcs.
Tools : 12mm Box wrench
Drive shaft holder (33B9990201)
Drive shaft holder
Drive shaft
5-3-26 FLYWHEEL
Using a special tool “FLYWHEEL HOLDER” to hold
the flywheel, loosen the flywheel nut.
Remove the flywheel using an ordinary flywheel puller.
M19 Nut : 1pce.
Tools : Socket wrench
Flywheel holder (33B9990101)
Flywheel puller (Available on market)
Flywheel holder