Instructions / Assembly

STEP 16
STEP 16
WIRING HARNESS
M6 FLANGE
BOLT
REGULATOR
TO IGNITION COIL
TO IGNITION COIL
TO KEY SWITCH
WIRE CP
GASKET
INTAKE MANIFOLD
M8 FLANGE NUT
GASKET
STEP 15
M8 FLANGE NUT
– 22 –
Step Parts to remove Remarks and procedures Fasteners
15
Intake manifold
M8 flange nut : 4 pcs.
16 Regulator and Wire CP
Disconnect wire connector from regulator,
and then remove regulator from #1 cylinder
baffle.
M6 x 12 Flange bolt : 2 pcs.