Instructions / Assembly

– 42 –
CHOKE
CONTROL ROD
RETURN
SPRING
WAVED
WASHER
LINK PIVOT
CHOKE
CONTROL
LINK
CHOKE
KNOB
CLAMP
M5 TAPPING
SCREW
23) CHOKE CONTROL
Attach chock control link between carburetor
chock lever and chock control lever.
Attach governor spring between governor lever
and speed control lever.
GOVERNOR
LEVER
GOVERNOR SHAFT
ROD SPRING
GOVERNOR ROD THROTTLE LEVER
24) GOVERNOR LEVER
Attach governor rod and rod spring between
governor lever and carburetor throttle lever, and
insert the governor lever to governor lever
shaft. Tighten locking bolt temporarily.
M8 FLANGEBOLT
CARBURETOR
GASKET,
carburetor
22) CARBURETOR
Set gasket onto intake manifold and install
carburetor.
M8 x 80 Flange bolt : 2 pcs.
Tightening Torque
16.6 - 18.6 N・m
(170 - 190 kgf・cm)
(12.3 - 13.7 ft・lb.)