Instructions / Assembly

– 46 –
30) OIL PRESSURE SWITCH
●
Install oil pressure switch onto crankcase.
[EH63, 64, 65]
●
Install oil pressure switch onto adapter(Oil
cooler). [EH72]
Tightening torque
5.9 - 9.8 N・m
(60 - 100 kgf・cm)
(4.3 - 7.2 ft・lb.)
OIL PRESSURE SWITCH
OIL PRESSURE SWITCH
O RING
OIL FILTER
OIL FILTER
3/4 TURNS
3/4 TURNS
31) OIL FILTER
Apply oil to O-ring and install oil filter by tighte-
ning about 3/4 turns after attaching crankcase
surface.
Tightening torque
9.9 - 14.7 N・m
(100 - 150 kgf・cm)
(16.3 - 19.8 ft・lb.)
[EH63, 64, 65]
[EH72]
[EH63, 64, 65]
[EH72]
NOTE ;
Not to tighten excessively.
NOTE ;
Start engine after assembling,
and check for no oil leakage
from oil filter.