Use and Care Manual
5. OPERATING YOUR ENGINE
− 9−
Pull the choke knob.
■ If the engine is cold or the ambient
temperature is low, pull the choke
knob fully.
■ If the engine is warm or the ambient
temperature is high, pull the choke
knob half-way, or keep it fully open.
CHOKE KNOB
STARTING
1
(Provided by the equipment manu-
facturer)
Open the fuel valve.
Set the speed control lever 1/3 of
the way towards the high speed
position.
FUEL VALVE
SPEED CONTROL LEVER
Turn the key switch to the "START"
position.
■ Do not operate the electric starter
continuously for more than 5
seconds, even if the engine dose not
start.
■ If the engine failed to start, set the
key to the "RUN" position and wait for
about 10 seconds before retrying.
■ Never turn the key switch to the
"START" position while engine is
running.
ELECTRIC STARTER
STOP
RUN
START
4
2
CLOSE
3
NOTE
Following operating method is for
the STD type speed control lever.
As to the fixed type speed control
lever (exp. Generator spec.), do
not move it otherwise the genera-
tor component such as voltage
regulator may be damaged.
EH63-65 EPA/CARB 取説EU1728 02.7.31 10:30 AM ページ9