Portable Generator User Manual

COMPONENTS
(See Fig.
11
)
PRE-OPERATION CHECKS
(See Fig.
22
)
Please refer to the illustrations on the back page of
the front cover or back cover for
Fig.
11
to
55
indicated in the sentence.
NOTE
q CONTROL PANEL
w FUEL TANK
e FUEL GAUGE
r TANK CAP
t AIR CLEANER
y FUEL COCK
u OIL GAUGE (OIL FILLER)
i SPEED ADJUSTER
o OIL FILTER
!0 OIL DRAIN PLUG
!1 FUEL FILTER
!2 RECOIL STARTER
!3 RECOIL STARTER HANDLE
!4 MUFFLER
!5 ELECTRIC STARTER
5
ENGLISHFRANÇAISEESPAÑOL
1. CHECK ENGINE OIL
(See Fig.
22
-
qq
thru
ee
)
Oil quality
Qualified are all trademark oils which fulfil at least
one of the following specifications:
ACEA – B2 / E2 or more significant
API – CD / CE / CF / CF-4 / CG-4 or more
significant.
If engine oil of a poorer quality is used, reduce oil
change intervals to 150 hours of operation.
Oil viscosity (See Fig.
22
-
qq
)
Select the viscosity class according to the ambient
temperature for cold starts.
When adding oil or checking the oil level, the engine
must be horizontal.
■
Remove oil filler screw and add engine oil.
(See Fig. 2-w)
■
To check the oil level, remove the dipstick, clean
it - then screw it back in and finally remove it
again.
Check the oil level on the dipstick and, if
necessary, top up to the max. level.
(See Fig. 2-e)
RGD3300H . . . . . . . . . . . . . . . . . . . . 1.1
RGD5000H . . . . . . . . . . . . . . . . . . . . 1.5
Oil capacity (Upper level) :
(L)
2. CHECK FUEL
Stop the engine before refilling the fuel
tank. Never refuel near a naked flame or
sparks which could start a fire.
Don't smoke.
Use only pure fuel and clean filling
equipment.
Take care not to spill fuel.
WARNING
CONTROL PANEL
a AC RECEPTACLES (20A)
b VOLTMETER
c FULL POWER SWITCH
d DC FUSE
e AC CIRCUIT BREAKER
f HOUR METER
g KEY SWITCH
h GROUND TERMINAL
i DC TERMINALS
j AC RECEPTACLES (30A)
RGD5000H us_GU2359 07.4.16 0:00 PM ページ5