User's Manual

MAN-00003: Subeca BLINC Module User Manual Rev 4.0 www.subeca.com
9
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
10
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
11
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
12
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
13
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
14
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
15
“m” - Pin or
“v” - Valve
AA:BB:CC:DD:EE:FF
16
Pressure Sensor
AA:BB:CC:DD:EE:FF
Property ID
(LoRaWAN) AppKey
* the first 5 devices are internal to the device (the device has a hard-wired meter and 4 valve drivers built in).
** this address matches the device’s BLE MAC
Power
Power Systems
The Subeca Module is designed to last many years from a single battery. As with any IOT device, power
systems must be carefully designed to ensure proper operation and a long lifetime. All power sources are
monitored by the processor to enable smart control of these power systems. For example, when the solar
panel is producing sufficient power, it is possible to achieve faster wireless transceiver times because the
device is not draining extra power from the batteries.
Power Input
Vin is the power input line and supports 3.1V - 6V inputs. The power supply should be able to handle 100mA of
input current but the device normally sleeps at about 300uA.
Solar Panel
The Subeca Module has the ability to monitor a solar panel and adjust update rates accordingly.
13