User's Manual

MAN-00003: Subeca BLINC Module User Manual Rev 4.0 www.subeca.com
FCC Information
FCC ID: 2AS4H-BLINC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF exposure considerations
This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm of separation
distance between the module and the user's body must be maintained at all times.
Instruction to Integrator
Labelling
A label must be affixed to the outside of final commercial product with the following statements:
This device contains FCC ID: 2AS4H-BLINC
Antenna
The antenna gain of a new antenna should be of the same type as the originally approved antenna and the
antenna gain should not be higher than the antenna gain of the originally tested antenna. The list of originally
approved PCB antennas is the following
- P/N: WPANT10148-S1A (BLE antenna), peak gain: 2.3 dBi
- P/N: WPANT10144-S2A (LoRA antenna), peak gain: 1.8 dBi
- P/N: WPANT10123-S1B-01A (LoRA antenna), peak gain: 1.4 dBi
RF exposure considerations
Consistent with §2.909(a), the following text must be included within the user’s manual or operator instruction
guide for the final commercial product:
This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device is only authorized for use in a mobile application. At least 20 cm of separation distance between
the module and the user's body must be maintained at all times.
Additional testing, Part 15 Subpart B disclaimer
The final host / module combination may also need to be evaluated against the FCC Part 15B criteria for
unintentional radiators in order to be properly authorized for operation as a Part 15 digital device. The FCC
Part 15 Statement shall be included in the user manual of the final commercial product if applicable.
Caution Statement for Modifications
CAUTION: Any changes or modifications not expressly approved could void the user’s authority to operate the
equipment.
5