User's Manual

27 | 31
1. Navbow+ 30
1. After each use, Navbow+ should be completely immersed in clear water for 30 minutes to prevent residue from seawater or foreign matter. Besides,
attentions should be paid to the following.
The battery must be installed during cleaning.
Use clean water.
20
Immerse in water for more than 20 minutes.
Do not add chemical cleaners such as laundry detergents or cleaning agent to the water.
Navbow+
When the Navbow+ is immersed in water, some bubbles may emerge from holes on its body. This is normal.
2. App Navbow+
2. For deep cleaning, please click the self-cleaning function on your mobile phone App. Then the booster will automatically run. You should immerse
the Navbow+ booster completely in fresh water.
Be careful to prevent the water from being splashed on your body.
3. Navbow+
3. Shake fully and clean the Navbow+ body to remove any foreign matter attached to it.
4.
4. Wipe the surface of the device with a clean, soft, dust-free cloth. Make sure that the body and battery have no water beads, and place them in a cool,
dry place to dry naturally.
Never use a hair dryer or drying apparatus to dry it.
Never spray the battery contact or the battery compartment of the host with water.
2
2 Storage
If the device will be idle for a long time, please note that the Mix Pro and the battery should be stored separately in the package; and please observe
the following directions.
1. 0-456520RH
1. Ensure that the device is stored in a cool and ventilated place, above 0C and below 45C where the humidity is 6520RH.
2.
2. Dont store it in areas exposed to direct sunlight.
3.
3. Keep it away from heat, fire, and children's reach.
4.
4. Keep it away from devices that may generate strong magnetic fields.
5. 10
5. Take out the device at least once a month and run it for about 10 seconds to prevent corrosion caused by changes in the storage environment.