Item Brochure
AMPLIFIER
Sensor: Piezoelectric Element
Amplification: 55 dB
Frequency Range: 100Hz to 2000Hz
Notch Filters: 150Hz and 180Hz
Temperature Range: 25 F to 130 F
Batteries: Two AA (dry cell or rechargeable)
Battery Life: 24 hours minimum (alkaline cells)
Weight: 10.6 ounces (with batteries)
Size: 8.15”w x 3.3”h x 2.4”d
HEADPHONES
Impedance: Stereo, 8 ohms
ABS CARRYING CASE
Weight (full): 10 lbs (4.55 Kg)
Size: 18”w x 12”h x 7”d
(457mm x 304mm x 178mm)
STANDARD CONTACT RODS
Short Rod: 4 inches, anti-slip tip
4-Section Rod Set: 52” in 4 sections, each 13” long, threaded
connections
OPTIONAL CONTACT RODS
40 Inches Rod: Single piece, light-weight stainless steel
60 Inches Rod: Single piece, light-weight stainless steel
Amplifier with push button ON/OFF switch, volume control, two-digit
display of loudness, and three-range sensitivity switch.
Use the short contact rod for listening at hydrants.
Use the long contact rods for listening at below-grade meters and
below-grade valves.
Notch filters reduce A/C hum from transformers, power lines, etc.
Excellent sensor sensitivity, leak sound amplification, and audio clarity.
Stereo headphones with soft leather ear covers are comfortable for
hours and hours.
Use the two-digit display to compare the loudness of leak sounds at
nearby locations, like adjacent water meters, close water hydrants,
close water valves, etc. The display can show which is loudest when
your ears can not tell.
Sturdy, light-weight carrying case weighs only 10 lbs. and fits behind
the seat in the truck.
LD-8 WATER LEAK DETECTOR
SubSurface Instruments, Inc.
⎥
1841-C Plane Park Drive, De Pere, WI. 54115
toll free: 855.422.6346
⎥
Website: www.ssilocators.com
⎥
email: info@ssilocators.com
KEY FEATURES
FEATURES
SPECIFICATIONS
1) 4-Section contact rod set (52”)
Over the ear stereo headphones
Amplifier w/display & volume control
ABS plastic custom carrying case
Short contact rod (4”)
1
2
3
4
5
1
2
3
4
5
Includes:
ABS custom case
Instruction manual