Item Brochure

 FREQUENCIES: 8kHz, 27kHz, 83kHz, Active
 PASSIVE FREQUENCIES: Radio Frequency, Live Cable + CPS
 OUTPUT POWER: 0.5 watts Inductive Mode, 1.0 watt
Direct Mode: 3W
 LOOPCHECK: Impedance 1 -10 ohms
 DETECTION METHOD: Maximum Method
Continuous Depth Measurement
Bar Method
Sonde
 DEPTH METHOD: Pull up
Continuous Depth Measurement
 DEPTH RANGE: Pull up 0-5m
Travers 0-2m
 OPERATING TEMP: -10ºC to -55ºC
 WIRELESS TRANSFER: Blue-Tooth Ver. 2.1 Class 2 SPP Prole
 Blue-tooth is available on receiver and the collected measuring data
can be transfered to your blue-tooth connected smart-phone*.
 The transmitter automatically switches to “Direct Mode” when the
connected dedicated cable is recognized by the unit.
 Impedance and phase are displayed during loop-check for more
accurate performance.
 Indicator of nearest pipe is clearly displayed on the screen and the
vibration mode allows an easier a user-friendly operation.
 The continuous depth measurement mode displays the depth of the
pipe on the screen to ensure there are no sudden changes that can
aect the readings.
 Compass feature. This feature helps the user to maintain a correct path
over the pipe or cable by showing visual indication of the orientation of
the pipe or cable that’s being tracked.

* The Blue-Tooth feature is only available for Android devices at the moment.
PL-G PIPE & CABLE LOCATOR
SubSurface Instruments, Inc.
⎥
1230 Flightway Drive, De Pere, WI. 54115
toll free: 855.422.6346
⎥
Website: www.ssilocators.com
⎥
email: [e-mail]
KEY FEATURES
Includes:
 Padded Carrying Case
 Ground Stake
 Direct Connection Cables
 Instruction Manual
FEATURES
SPECIFICATIONS
1) Receiver
2) Receiver’s Control Panel
T Speaker
3) Transmitter’s Control Panel
4) Transmitter
1
2
3
4
5
1
2
3
4
5
Rev. 04/23/2019