Item Brochure

• Three button keypad simplifies the user interface
• 8 Locating Modes: the multi-channel processor
allows for simultaneous field detection from a multiple
antenna array ensuring accuracy
• Transmits 2 frequencies at the same time
• Customizable frequencies and operational modes
• Automatic Impedance Matching Technology:
maximizes your transmission range while minimizing
power consumption
• Remotely controls your transmitter from the receiver to
more than 400 meters (437 yards)
• High-Contrast LCD Interface with Back light: guides
the operator to the target location by providing all
relevant data including continuous depth, current
measurement, signal strength, and directional arrows
• Constant Depth & Current Measurement: real time
updates on line depth and signal condition
• 1-4 year warranty. Warranty extends to 4 years when
registered within 30 days of original purchase
• Made in the USA
Soft Padded
Carrying Case
PL-VF3 PIPE & CABLE LOCATOR
PL-VF3 DESCRIPTION
FEATURES
SubSurface Instruments, Inc | 1230 Flightway Drive, De Pere, WI. 54115
toll free: 855.422.6346
|
Website: www.ssilocators.com
|
email: [e-mail]
Rev. 03/01/2021
PL-VF Receiver
PL-VF3 Transmitter
Direct connection Cord
Ground Rod
Protective Carrying Case
User Manual
Batteries
INCLUDES
6
1
2
3
4
5
6
7
5
1
4
2
3
Simple, accurate and affordable, the PL-VF3 Locating System
will meet the demands of any locate task. This locator is
designed for the locating professional, but it is simple enough
to be used by anyone needing to locate.
The PL-VF3 Locating System is adaptable; frequencies and
operational modes may be added or deleted on demand to
suit the user’s locating needs.
Our innovative technology creates a remote link between the
transmitter and receiver. Users can control the transmitter’s
output power and frequency right from the hand-held
receiver, eliminating the back and forth walking between
devices.
A large, high-contrast LCD offers clearly visible signal
response in any lighting. Automatic depth, automatic current,
and proximal directional arrows are readable in the brightest
sunshine or back-lit for viewing in dimmer conditions.
Whether the locate is measured in feet or miles, 3 watts of
power and automatic impedance matching from 5 ohms to
25,000 ohms, ensures adequate
signal. The PL-VF3 Locating
System is a must have for anyone
needing a simple and accurate
locator.
Standard Frequencies:
512 Hz, 8khz, 33kHz, 82kHz
and 200kHz.
7