Designer Series Installation Guide

4 | Sub-Zero Customer Care 800.222.7820
Site Preparation
W
OPENING WIDTH
H
OPENING
HEIGHT
NOTE: 3
1
/2" (89) finished returns will be visible and should be finished to match cabinetry—
4
1
/2" (114) for outdoor model.
SIDE VIE
W
TOP VIEW
FRONT VIEW
3
/4" (19)
TYPICAL
FRAMED
CABINETRY
W
FILLER
3
1
/2" (89)
FINISHED
RETURN
FRAMELESS
CABINETRY
W
3
/4" (19)
TYPICAL
3
1
/2" (89)
FINISHED
RETURN
25" (635)
OPENING
DEPTH
25
3
/4" (654)
FOR OUTDOOR
MODEL
OPENING DIMENSIONS
COLUMN / TALL W* H
18" Column 18" (457) 84" (2134)
24" Column 24" (610) 84" (2134)
30" Column / Tall 30" (762) 84" (2134)
36" Column / Tall 36" (914) 84" (2134)
DRAWER W* H
24" Drawer 24" (610) 34⁄" (876)
27" Drawer 27" (686) 34⁄" (876)
30" Drawer 30" (762) 34⁄" (876)
36" Drawer 36" (914) 34⁄" (876)
The depth of each designer model is 24" (610). Allow for
panel thickness when planning the finished opening depth.
A minimum 3⁄"
(89) finished return is required on all sides
of the opening—4⁄"
(114) for the outdoor model. Framed
cabinets require additional finished filler material behind
the face frame for a proper installation. Refer to the illus-
tration.
DUAL INSTALLATION
When installing two units side by side in a dual installa-
tion, the opening width is the width of the two units added
together. A dual installation kit is required for this installa-
tion. If a dual installation kit is not specified, a minimum
2"
(51) filler strip is required between the units.
Dual installation kits are available through an authorized
Sub-Zero dealer. For questions regarding the installation,
call Sub-Zero Customer Care at 800-222-7820.
Opening Dimensions
DESIGNER MODELS