Design Guide REVISED 5/2021
Design Guide Contents 3 Classic Refrigeration 36 PRO Refrigeration 44 Designer Refrigeration 54 Wine Storage 88 Designer Undercounter Refrigeration 96 Undercounter Ice Maker 100 Sub-Zero Warranty Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified. 2 | Sub-Zero Customer Care 800.
Classic Refrigeration Classic Refrigeration For Classic refrigeration, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes Classic refrigeration nothing short of revolutionary. CLASSIC MODELS BI-36R BI-30U BI-36UFD(ID) BI-42SD BI-36RG BI-30UG BI-42UFD(ID) BI-48S(ID) BI-36F BI-36U(ID) BI-36UG BI-36S BI-42S(ID) BI-48SD subzero.
Classic Refrigeration Classic Design Options FRAMED OVERLAY Choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed application is an overlay model with framed design features. Panel, grille, and handle options are available. Custom overlay door panels can be combined with unique handle hardware for design flexibility. Shown with the pro handle option to complement Wolf ranges. Customize with panel, grille, and handle options.
Classic Refrigeration Classic Design Options FLUSH INSET STAINLESS STEEL The flush inset design option allows for flush door and grille panels and custom handle hardware. Shown with the tubular handle option to match Wolf built-in ovens. The flush inset application is an overlay model with flush inset panels. Customize with panel, grille, and handle options. Stainless steel models require no customization. To complement the look of Wolf ranges, choose the pro handle option (shown).
Classic Refrigeration Overall Dimensions ALL REFRIGERATOR / ALL FREEZER OVER-AND-UNDER 26 3/16" (665) 36" (914) 26 3/16" (665) 30" (762) 84" 84" (2134) (2134) 73 3/4" 50 3/4" (1873) (1289) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" 4" (102) 23 7/8" (606) (606) 14 1/8" (359) 12 1/8" (308) 23 5/8" 37 1/4" (600) (946) 311/4" (796) 2 3/8" (60) 2 3/8" (60) Model BI-36R, BI-36RG, BI-36F IMPORTANT NOTE: Overall dimensions a
Classic Refrigeration Overall Dimensions OVER-AND-UNDER 26 3/16" (665) 36" (914) 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 50 3/4" 50 3/4" (1289) (1289) 23" 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) (584) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 23 7/8" (606) 14 1/8" (359) (600) 23 7/8" (606) 23 7/8" (606) 23 5/8" 4" (102) 8" (203) 191/2" 23 5/8" 37 1/4" (495) (946) (600) 2 3/8" (60) 2 3/8" (60) Model BI-36U(ID), BI-36UG Model BI-36UFD(ID) subzero.
Classic Refrigeration Overall Dimensions OVER-AND-UNDER SIDE-BY-SIDE 26 3/16" (665) 42" (1067) 26 3/16" (665) 36" (914) 84" 84" (2134) (2134) 50 3/4" (1289) 73 3/4" (1873) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) (606) 7 1/4" (184) 9" (229) 23 5/8" (600) 8 3/4" (222) 221/4" (565) 221/4" (565) 2 3/8" (60) 2 3/8" (60) Model BI-42UFD(ID) IMPORTANT NOTE: Overall dimensions are based on stainless s
Classic Refrigeration Overall Dimensions SIDE-BY-SIDE 26 3/16" (665) 42" (1067) 84" 84" (2134) (2134) 73 3/4" 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 26 3/16" (665) 48" (1219) (1873) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 23 7/8" (606) 4" (102) 23 7/8" 23 7/8" (606) 7 1/2" (191) 10 3/8" (264) (606) 8 3/8" (213) 11 5/8" (295) 26 1/4" 30" (668) (762) 2 3/8" (60) Model BI-42S(ID), BI-42SD 23 7/8" (606) 2 3/8" (60) Model BI-48S(ID), BI-48SD subzero.
Classic Refrigeration Opening Dimensions STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W OPENING WIDTH TYPICAL FILLER W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Classic Refrigeration Opening Dimensions FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 5 11/16" 3 1/2" 2 3/16" (56) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW CLEAT 3/4" (19) TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W CLEAT FILLER 3/4" (19) TYPICAL W FLUSH INSET WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visible and shou
Classic Refrigeration Opening Dimensions DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" W OPENING WIDTH (2127) OPENING HEIGHT TYPICAL FILLER W FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Classic Refrigeration Opening Dimensions DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH (56) CLEAT 5 11/16" 3 1/2" 2 3/16" 3/4" (19) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) CLEAT 5 11/16" 3 1/2" (89) (145) FINISHED RETURN W 84" FLUSH INSET WIDTH (2134) FLUSH INSET HEIGHT SIDE VIEW FILLER 3/4" (19) TYPICAL W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visible a
Classic Refrigeration Electrical Requirements Plumbing Requirements The electrical supply should be located within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve.
Classic Refrigeration Custom Panels For all models excluding stainless steel, door panels and handles must be provided. Refer to Panel Requirements below and the charts on pages 18–23 for custom panel dimensions for your specific design application. IMPORTANT NOTE: Do not cover a glass door with a solid panel. Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
Classic Refrigeration Custom Panels PARTIAL FRAMED OPTION PANEL MOUNTING KIT The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero. com.
Classic Refrigeration Custom Panels FLUSH INSET PANELS ICE AND WATER DISPENSER The flush inset application is an overlay model with flush inset panels. It is not a separate model. For models BI-42SD and BI‑48SD, the refrigerator door panel must include a cutout to accommodate the external dispenser. The bezel will accommodate a 1/4" (6) thick panel for framed applications and a 3/4" (19) thick panel for overlay and flush inset applications.
Classic Refrigeration Framed Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A H H W W W W W BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel H H BI-36RG H H H H H H W H 69 9/16" (1767) W 35 3/4" (908) H H H H H H 8 15/16" (227) A B B B A A 10 5/16" (262) W W W W Door Panel FREEZER Drawer Panel GRILLE (OPTIONAL) Grille Panel H H H W W W W
Classic Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Framed Panel Dimensions HH HH HH HH AA BB WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW WW BI-42SD, BI-48SD MODEL BI-36S MODEL BI-48S, BI-48SID, BI-48SD REFRIGERATOR Door Panel W H 19 13/16" (503) 69 9/16" (1767) FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel W H 15 7/16" (392) 69 9/16" (1767) W H 35 3/4" (908) 8 15/16" (227) REFRIGERATOR Door Panel FREEZER Door Panel GRILLE (OPTIONAL) Grille Panel BI-48SD D
Classic Refrigeration Overlay Panel Dimensions H H H H H H H A A H H H H AH A A A A H H H H H H H H A A H AH AH H A AH A H H H H AH A H H W W W W W BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Overlay Panel Spacer Panel Backer Panel H H H H H GRILLE Overlay Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W W W H H H Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay
Classic Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Overlay Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR HH Overlay Panel Spacer Panel Backer Panel HH W H 25 1/16" (637) 24 3/16" (614) 24 13/16" (630) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) FREEZER Overlay Panel Spacer Panel Backer Panel AA BB W H 16 11/16" (424) 15 13/16" (402) 16 7/16" (418) 69 3/4" (1772) 68 15/16" (1751) 69 9/16" (1767) GRILLE WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW
Classic Refrigeration Flush Inset Panel Dimensions H H H H H H H B A H H H H AH A A A A H H H H H H H H B A H AH AH H A AH A H H H H AH A H H W W W W W B BI-30U, BI-36U(ID) H H H H H MODEL BI-36R, BI-36RG, BI-36F REFRIGERATOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel H H H H H GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W W W W W W W W W H H H Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backe
Classic Refrigeration WW AA HH WW HH HH BB WW WW WW WW WW Flush Inset Panel Dimensions HH MODEL BI-42S, BI-42SID, BI-42SD HH REFRIGERATOR HH Flush Inset Panel Spacer Panel Backer Panel HH W H 259/16" (649) 243/16" (614) 2413/16" (630) 693/4" (1772) 6815/16" (1751) 699/16" (1767) FREEZER Flush Inset Panel Spacer Panel Backer Panel AA BB W H 173/16" (437) 1513/16" (402) 167/16" (418) 693/4" (1772) 6815/16" (1751) 699/16" (1767) GRILLE WW WW BI-36S, BI-42S(ID), BI-48S(ID) WW F
Classic Refrigeration TOP VIEW BACKER SPACER PANEL OFFSET DOOR CABINETRY BACKER SPACER TOP VIEW 5/16" (8) BACKER SPACER 5/8" (16) BACKER SPACER BACKER CABINETRY SPACER 1/2" (13) TOP VIEW 5/16" (8) 1/8" (3) DOOR 5/CABINETRY 8" (16) 1/4" (6) 5/16" (8) 1/2" (13) BACKER CABINETRY 5/8" SPACER (16) Door (hinge) / Drawer / Grille Sides Doors (handle) Sides (French door only) Grille Top Grille Bottom / Door Top Door Bottom / Drawer Top Drawer Bottom C CABINETRY D F 5/8" (16) 1/2" (13) 5/16"
Classic Refrigeration Dual Installation If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. A custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two 84" (2134) units with opposite hinges.
Classic Refrigeration Dual Flush Inset Panel Dimensions H H H H H H H H H H H H A AH AH A A A H H H H B B B A H H A AH H H H A AH AH A A A H H H H H H W W W W BI-36R, BI-36F B REFRIGERATOR / FREEZER Flush Inset Panel Spacer Panel Backer Panel H H GRILLE Flush Inset Panel Spacer Panel Backer Panel BI-36RG Stiles / Rails W W W W H H W W W W WW REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Pane
Classic Refrigeration TOP VIEW BACKER SPACER DUAL FLUSH INSET PANEL OFFSET DOOR CABINETRY BACKER SPACER TOP VIEW 5/16" (8) 5/8" (16) BACKER SPACER TOP VIEW DOOR / DRAWER / GRILLE DOOR PANEL/ DRAWER / GRILLE Dual Installation TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE DOOR DOOR CABINETRY TOP VIEW TOP VIEW DOOR TOP VIEW DOOR / DRAWER / GRILLE PANEL 5/16" (8) 1/2" (13) BACKER CABINETRY SPACER 1/2" (13) TOP VIEW 5/16" (8) 5/16" (8) 1/8" (3) DOOR 5/CABINETRY 8" (16) DOOR / DRAWER / G
Classic Refrigeration Dual Installation DUAL WIDE GRILLE DUAL WIDE GRILLE—FLUSH INSET A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. TWO 30" MODELS For overlay and flush inset panel dimensions for the dual wide grille, refer to the charts below. Dimensions listed are for a standard 84" (2134) finished height.
Classic Refrigeration Side Panel Standard Handles The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
Classic Refrigeration Framed Panels FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL 1/4" (6) FRAMED PANEL DOOR Framed panel thickness 30 | Sub-Zero Customer Care 800.222.
Classic Refrigeration Overlay / Flush Inset Panels FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 1" 2" (25) (51) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .10" (3) SPACER PANEL 1/4" (6) BACKER PANEL DOOR Overlay and flush inset panel thickness subzero.
Classic Refrigeration Overlay Application FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view) 32 | Sub-Zero Customer Care 800.222.
Classic Refrigeration Flush Inset Application FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 110° door opening (top view) subzero.
Classic Refrigeration FILLER STRIP 11/4" (32) APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation FULL-SCALE TEMPLATE Typical framed, overlay, or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view) 34 | Sub-Zero Customer Care 800.222.
Classic Refrigeration FILLER STRIP 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE Dual Flush Inset Installation DOOR CLOSED DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual flush inset installation (top view) subzero.
PRO Refrigeration PRO Refrigeration Freshness finds unmistakable expression with Sub-Zero PRO refrigeration. A monument to food preservation— equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. Available in 36" and 48" widths, with a glass or solid door, and may be either built in or freestanding. 36 | Sub-Zero Customer Care 800.222.
PRO Refrigeration Overall Dimensions 36" MODEL 25 7/8" (657) 36" (914) 84" 42 1/8" (2134) (1070) 30 1/2" (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" (606) 26" (660) 26" 37 3/8" (660) (949) 2 3/8" (60) Model PRO3650 / PRO3650G subzero.
PRO Refrigeration Overall Dimensions 48" MODEL 25 7/8" (657) 48" (1219) 84" 42 1/8" (2134) (1070) 30 1/2" (775) 4" (102) HEIGHT DIMENSIONS ± 1/2" (13) 30 3/16" (767) 23 7/8" 23 7/8" (606) (606) 21" (533) 26" (660) 30 3/4" (781) 14 1/2" (368) 2 3/8" (60) Model PRO4850 / PRO4850G 38 | Sub-Zero Customer Care 800.222.
PRO Refrigeration Opening Dimensions STANDARD / FLUSH INSTALLATION D 3/4" (19) OPENING DEPTH 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN W H W OPENING WIDTH OPENING HEIGHT TYPICAL FILLER FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry.
PRO Refrigeration Opening Dimensions DUAL STANDARD / FLUSH INSTALLATION D 3/4" (19) OPENING DEPTH 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN W H OPENING WIDTH OPENING HEIGHT TYPICAL FILLER W FRAMED CABINETRY SIDE VIEW FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry.
PRO Refrigeration Dual Installation Electrical Requirements If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
PRO Refrigeration Plumbing Requirements Installation must comply with all applicable plumbing codes. PLUMBING REQUIREMENTS Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves. The water supply line must not interfere with the installation of the anti-tip bracket.
PRO Refrigeration Standard Handles Optional stainless steel pro handles are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for PRO models. HANDLE LENGTH 36" MODEL 48" MODEL Door 2711/16" (703) 2711/16" (703) Refrigerator Drawer 263/16" (665) 1915/16" (506) Freezer Drawer 263/16" (665) 119/16" (294) subzero.
Designer Refrigeration Designer Refrigeration With custom front panels and hardware, Sub-Zero Designer columns, tall, and drawer models disappear into the decor. Designer units fit flush with cabinetry, making Designer refrigeration as practical and beautiful in the master suite, bar, or theatre room as in the kitchen. Model ID-24RO, approved for outdoor installations, is ideal for any outdoor kitchen.
Designer Refrigeration Overall Dimensions COLUMN COLUMN W 24" (610) 4 1/2" (114) A B 18" Column 18" (457) 21/2" (64) 161/2" (419) 24" Column 24" (610) 4" (102) 221/2" (572) 30" Column 30" (762) 55/8" (143) 281/2" (724) 36" Column 36" (914) 71/4" (184) 341/2" (876) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 69 1/2" 84"* (2134) W (1765) 3 5/8" (92) HEIGHT DIMENSIONS ± 1/2" (13) A 13/4" (45) B subzero.
Designer Refrigeration Overall Dimensions TALL TALL W 24" (610) 4 1/2" (114) W A B 30" Tall 30" (762) 55/8" (143) 281/2" (724) 36" Tall 36" (914) 71/4" (184) 341/2" (876) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 44 7/8" 84"* (2134) (1140) 3/8" (10) 13 5/16" (338) 3/8" (10) 10 9/16" (268) 3 5/8" (92) HEIGHT DIMENSIONS ± 1/2" (13) A 13/4" (45) 17 3/4" (451) 46 B | Sub-Zero Customer Care 800.222.
Designer Refrigeration Overall Dimensions DRAWER DRAWER W 24" (610) 1/4" (6) 13 5/16" (338) 3/8" (10) 34 1/2"* (876) 10 9/16" (268) HEIGHT DIMENSIONS ± 1/2" (13) W 24" Drawer 24" (610) 27" Drawer 27" (686) 30" Drawer 30" (762) 36" Drawer 36" (914) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 3 5/8" (92) 17 3/4" (451) subzero.
Designer Refrigeration Opening Dimensions DESIGNER SERIES OPENING DIMENSIONS COLUMN / TALL 25" (635) OPENING DEPTH 25 3/4" (654) FOR OUTDOOR MODEL 18" Column 24" Column 30" Column / Tall 36" Column / Tall TOP VIEW DRAWER 24" Drawer 27" Drawer 30" Drawer 36" Drawer W* H 18" (457) 24" (610) 30" (762) 36" (914) 84" (2134) 84" (2134) 84" (2134) 84" (2134) W* H 24" (610) 27" (686) 30" (762) 36" (914) 341/2" (876) 341/2" (876) 341/2" (876) 341/2" (876) *For stainless steel side panel accessory, add
Designer Refrigeration Electrical Requirements Plumbing Requirements Locate the electrical supply within the shaded area shown in the illustration and chart below. A separate circuit servicing only this appliance is required. Locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves.
Designer Refrigeration Stainless Steel Panels Custom Panels The outdoor model requires the use of Sub-Zero stainless steel outdoor accessory panels. Stainless steel panels and handles are available through an authorized Sub‑Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For all models, door panels and handles must be provided. Refer to the Panel Requirements chart and Typical Panel Dimensions.
Designer Refrigeration Custom Panels TYPICAL PANEL DIMENSIONS DOOR PANEL HEIGHT The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.
Designer Refrigeration Custom Panels Standard Handles TOE KICK CLEARANCE Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Indoor Models Only: The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
Designer Refrigeration Maximum Door Opening FULL-SCALE TEMPLATE As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop. 3/4" (19) PANEL DOOR OPEN MAXIMUM 105° 1/8" (3) REVEAL POTENTIAL INTERFERENCE DOOR CLOSED 3/4" (19) PANEL ADJACENT CABINETRY POTENTIAL INTERFERENCE 0" 1" (25) SCALE Maximum door opening (top view) subzero.
Wine Storage Wine Storage Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced racks, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home. WINE STORAGE MODELS DEU2450W IW-18 BW-30 54 | Sub-Zero Customer Care 800.222.
Wine Storage Overall Dimensions MODEL DEU2450W 23 1/8" (587) 24" (610) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 34 1/2" (876) HEIGHT DIMENSIONS ± 1/2" (13) 9 5/8" (245) 26 1/2" (673) subzero.
Wine Storage Opening Dimensions MODEL DEU2450W The depth of each model is 231/8" (587). Allow for panel thickness when planning the finished opening depth. A minimum 31/2" (89) finished return is required on all sides of the opening. Framed cabinets require additional finished filler material behind the face frame for a proper installation. Refer to the illustration.
Wine Storage Dual Installation MODEL DEU2450W If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
Wine Storage Overall Dimensions COLUMN COLUMN W 84"* (2134) 24" (610) B IW-18 18" (457) 21/2" (64) 161/2" (419) IW-24 24" (610) 4" (102) 221/2" (572) IW-30 30" (762) 55/8" (143) 281/2" (724) 69 1/2" IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. (1765) 3 5/8" (92) A 13/4" (45) B | A 4 1/2" (114) HEIGHT DIMENSIONS ± 1/2" (13) 58 W Sub-Zero Customer Care 800.222.
Wine Storage Overall Dimensions TALL TALL IW-30R, IW-30CI W W A B 30" (762) 55/8" (143) 281/2" (724) 24" (610) 4 1/2" (114) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 44 7/8" 84"* (2134) (1140) 3/8" (10) 13 5/16" (338) 3/8" (10) 10 9/16" (268) 3 5/8" (92) HEIGHT DIMENSIONS ± 1/2" (13) A 13/4" (45) 17 3/4" (451) B subzero.
Wine Storage Opening Dimensions DESIGNER WINE STORAGE OPENING DIMENSIONS 25" (635) OPENING DEPTH W* 18" Column 18" (457) 24" Column 24" (610) 30" Column / Tall 30" (762) *For stainless steel side panel accessory, add 1" (25) per panel to opening width. TOP VIEW The depth of each Designer (IW) model is 24" (610). Allow for panel thickness when planning the finished opening depth. A minimum 31/2" (89) finished return is required on all sides of the opening.
Wine Storage Overall Dimensions MODEL BW-30 26 3/16" (665) 30" (762) IMPORTANT NOTE: Overall dimensions are based on the stainless steel model. For flush inset applications, add 1/2" (13) to door clearance dimensions. 84" (2134) 73 3/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 23 7/8" (606) 23 7/8" (606) 17" (432) 311/4" (796) 2 3/8" (60) subzero.
Wine Storage Opening Dimensions MODEL BW-30 STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W TYPICAL FILLER W OPENING WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Wine Storage Opening Dimensions MODEL BW-30 FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH 5 11/16" 3 1/2" 2 3/16" (56) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW CLEAT 3/4" (19) TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W CLEAT FILLER 3/4" (19) TYPICAL W FLUSH INSET WIDTH FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visible and s
Wine Storage Opening Dimensions MODEL BW-30 DUAL STANDARD INSTALLATION 24" (610) OPENING DEPTH 3/4" (19) 3 1/2" (89) TYPICAL FINISHED RETURN TOP VIEW W FRAMELESS CABINETRY 3/4" (19) 3 1/2" (89) FINISHED RETURN 83 3/4" (2127) OPENING HEIGHT SIDE VIEW W OPENING WIDTH TYPICAL FILLER W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. Shaded line represents profile of unit.
Wine Storage Opening Dimensions MODEL BW-30 DUAL FLUSH INSET INSTALLATION 26 3/16" (665) FLUSH INSET DEPTH (56) CLEAT 5 11/16" 3 1/2" 2 3/16" 3/4" (19) (89) (145) FINISHED RETURN FINISHED CLEATS TOP VIEW TYPICAL W FRAMELESS CABINETRY 11/4" 1/4" (6) (32) CLEAT 5 11/16" 3 1/2" (89) (145) FINISHED RETURN 84" (2134) FLUSH INSET HEIGHT SIDE VIEW W FLUSH INSET WIDTH FILLER 3/4" (19) TYPICAL W FRAMED CABINETRY FRONT VIEW NOTE: 3 1/2" (89) finished returns and shaded areas will be visibl
Wine Storage Electrical Requirements Locate the electrical supply within the shaded area shown in the illustration for your specific model. For Designer (IW) models, also refer to the chart. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Wine Storage Plumbing Requirements MODEL IW-30CI PLUMBING REQUIREMENTS For model IW-30CI, locate the water supply line within the shaded area shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves. The water supply line must not interfere with installation of the anti-tip bracket. Water Supply Pressure Excess Line for Connection 1/4" OD copper, braided stainless steel, or PEX tubing 35–120 psi (2.4–8.
Wine Storage Custom Panels Custom Panel—DEU2450W For all models excluding stainless steel, door panels and handles must be provided. Refer to the panel requirements and custom panel dimensions charts for your specific model and design application. For model DEU2450W, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes. Refer to the following charts for panel requirements and dimensions. Do not install a solid panel on a glass door unit.
Wine Storage Custom Panel—DEU2450W TOE KICK CLEARANCE MAXIMUM DOOR OPENING The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. For questions regarding the installation, call Sub‑Zero Customer Care at 800-222-7820. As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop.
Wine Storage Custom Panel—Designer For Designer (IW) models, custom door panels and handle hardware must be provided. Refer to the Panel Requirements chart and Typical Panel Dimensions. Do not install a solid panel on the glass door unit. A solid door is available as a sales accessory through an authorized Sub-Zero dealer. The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit.
Wine Storage Custom Panel—Designer TYPICAL PANEL DIMENSIONS DUAL INSTALLATION For dual installations, refer to the illustration for panel height and the chart below for panel width.
Wine Storage Custom Panel—Designer DOOR PANEL HEIGHT TOE KICK CLEARANCE The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below. The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
Wine Storage Custom Panel—BW-30 FRAMED FRAMED PANEL DIMENSIONS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1/4" (6), a filler material must be added to achieve a proper fit. If the panel is thicker than 1/4" (6), rout an edge around the panel or mount the custom panel on a sheet of 1/4" (6) thick material and insert into the channel.
Wine Storage Custom Panel—BW-30 OVERLAY OVERLAY PANEL DIMENSIONS Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel, and a 1/4" (6) backer panel. Refer to the illustrations below.
Wine Storage Custom Panel—BW-30 FLUSH INSET FLUSH INSET PANEL DIMENSIONS The flush inset application is an overlay model with flush inset panels. It is not a separate model. The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel, and a 1/4" (6) backer panel. Refer to the illustrations for overlay panels on the previous page.
5/16" (8) Wine Storage 5/8" (16) TOP VIEW TOP VIEW CABINETRY DOOR / DRAWER / GRILLE 1/2" (13) 5/16" (8) 5/32" (4) GRILLE Custom Panel—BW-30 BACKER CABINETRY SPACER FLUSH INSET PANEL OFFSET The illustrations provide panel offsets and reveals for PANEL model BW-30 in a flush inset application. Refer to the chart 5/16" (8) 1/2" below for reference to the illustrations.
Wine Storage Custom Panel—BW-30 DUAL INSTALLATIONS DUAL FLUSH INSET PANEL DIMENSIONS A dual installation kit may be required if two models BW-30 or a model BW-30 and a Classic unit are installed side by side. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two 84" (2134) units with opposite hinges.
Wine Storage TOP VIEW TOP VIEW DOOR / DRAWER / GRILLE BACKER SPACER DOOR CABINETRY DOOR TOP VIEW 5 /16" (8) Custom Panel—BW-30 DUAL FLUSH INSET PANEL 1/8" (3) BACKER SPACER BACKER CABINETRY SPACER The illustrations provide panel offsets and reveals for PANEL model BW-30 in a dual flush inset application. Refer to 5the /16" (8) chart below for reference to the illustrations.
Wine Storage Custom Panel—BW-30 SIDE PANEL 24" (610) The custom side panel must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations. When installing model BW-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available for an 84" (2134) finished height through an authorized Sub-Zero dealer.
Wine Storage Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for wine storage models.
Wine Storage Wine Rack Wood Facing FULL-SCALE TEMPLATE WOOD FACING WIDTH The natural cherrywood facing on wine storage racks can be stained and sealed, or replaced with wood more complementary to surrounding cabinetry. Refer to the full-scale templates below for the profile dimensions of the wood facing and the charts for the width.
Wine Storage Framed Panel—BW-30 FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 2" 1" (51) (25) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL 1/4" (6) FRAMED PANEL DOOR Framed panel thickness 82 | Sub-Zero Customer Care 800.222.
Wine Storage Overlay / Flush Inset Panels—BW-30 FULL-SCALE TEMPLATE Overlay and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include the backer and spacer panels. Mount the handle close to the opening edge of the door. DEPTH OF TUBULAR AND PRO HANDLES 1" 2" (25) (51) 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL .10" (3) SPACER PANEL 1/4" (6) BACKER PANEL DOOR Overlay and flush inset panel thickness subzero.
Wine Storage Overlay Application—BW-30 FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT OVERALL WIDTH OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 90° door opening (top view) 84 | Sub-Zero Customer Care 800.222.
Wine Storage Flush Inset Application—BW-30 FULL-SCALE TEMPLATE 24" (610) TO BACK WALL For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets. 1 1/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL 0" 1" (25) SCALE 110° door opening (top view) subzero.
Wine Storage FILLER STRIP 11/4" (32) APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE Dual Standard Installation—BW-30 FULL-SCALE TEMPLATE Typical framed, overlay, or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual standard installation (top view) 86 | Sub-Zero Customer Care 800.222.
Wine Storage FILLER STRIP 1 1/2" (38) 1/2" (13) PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE Dual Flush Inset Installation—BW-30 DOOR CLOSED DOOR OPEN 110° FULL-SCALE TEMPLATE Typical flush inset dual installation with filler strip at maximum 110° door opening. Panel thickness may require a 90° door stop. 0" 1" (25) SCALE Dual flush inset installation (top view) subzero.
Designer Undercounter Refrigeration Undercounter Refrigeration The Sub-Zero Designer Undercounter Refrigeration is a helpful addition to a master suite, bar, home office, or media room. Choose from an all refrigerator, combination with ice maker, beverage center, wine unit, or outdoor refrigerator. The design flexibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They are ready to be fitted with a custom or stainless steel panel.
Designer Undercounter Refrigeration Overall Dimensions UNDERCOUNTER MODELS 23 1/8" (587) 24" (610) IMPORTANT NOTE: Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness. 34 1/2" (876) HEIGHT DIMENSIONS ± 1/2" (13) 9 5/8" (245) 26 1/2" (673) subzero.
Designer Undercounter Refrigeration Opening Dimensions DESIGNER UNDERCOUNTER MODELS DUAL INSTALLATION If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between the units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
Designer Undercounter Refrigeration Electrical Requirements Plumbing Requirements Locate the electrical supply within the shaded area shown in the illustration below. A separate circuit servicing only this appliance is required. MODEL DEU2450CI IMPORTANT NOTE: For indoor models, a ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. For the outdoor model, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock.
Designer Undercounter Refrigeration Stainless Steel Panels Custom Panel Stainless steel panels and handles are available through an authorized Sub‑Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For all models, a door panel and handle must be provided. Refer to the following charts for panel requirements and dimensions. The depth of each model is 231/8" (587). Allow for panel thickness when planning the finished opening depth.
Designer Undercounter Refrigeration Custom Panel TYPICAL PANEL DIMENSIONS DUAL INSTALLATION For dual installations, refer to the chart below for typical panel dimensions. H H PANEL DIMENSIONS—DUAL INSTALLATION MODEL W Undercounter Model W W H 2313/16" (605) 303/8" (772) PANEL DIMENSIONS MODEL Undercounter Model STILES / RAILS Stiles Top Rail Bottom Rail W H 233/4" (603) 303/8" (772) MIN* 31/4" (83) 31/2" (89) 41/2" (114) *Glass door models only. subzero.
Designer Undercounter Refrigeration Custom Panel TOE KICK CLEARANCE MAXIMUM DOOR OPENING The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below. For questions regarding the installation, call Sub‑Zero Customer Care at 800-222-7820. As the panel width and/or depth increases, so does the potential for panel interference. Interference may be minimized by using the 90° door stop.
Designer Undercounter Refrigeration Standard Handles Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths for Designer Undercounter models. HANDLE LENGTH TUBULAR PRO 24" Model 243/16" (614) 221/2" (572) NA 221/2" (572) Outdoor Model subzero.
Undercounter Ice Maker Undercounter Ice Maker In the kitchen, bar, or media room, a Sub-Zero high-volume ice maker is a must for entertaining. The design flexibility of this compact unit allows it to fit in any room or outdoor kitchen. The indoor ice maker unit is ready to be fitted with a custom panel and handle or can be ordered with a stainless steel panel and handle. 96 | Sub-Zero Customer Care 800.222.
Undercounter Ice Maker Overall Dimensions Opening Dimensions ICE MAKER ICE MAKER 14 3/4" (375) 23" (584) 24" (610) OPENING DEPTH 33 5/8" (854) TOP VIEW 4" (102) 34 1/2" 15 1/4" (876) OPENING HEIGHT 18" (457) (387) OPENING WIDTH FRONT VIEW SIDE VIEW NOTE: 3 1/2" (89) finished returns will be visible and should be finished to match cabinetry. 6" (152) 3/4" (19) 3 1/2" (89) FINISHED RETURN IMPORTANT NOTE: Overall dimensions do not include panels or handles.
Undercounter Ice Maker Electrical Requirements Plumbing Requirements Locate the electrical supply as shown in the illustration below. A separate circuit servicing only this appliance is required. For ease of installation, recess the water shut off into the wall or place it in an adjacent cabinet. Locate the water supply as shown in the illustration below. Connect the water supply line to the house supply with an easily accessible shut-off valve. Do not use self‑piercing valves.
Undercounter Ice Maker Stainless Steel Panel Standard Handles A stainless steel panel and handle is available through an authorized Sub‑Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Optional stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. Refer to the chart below for standard handle lengths.
Warranty Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certified Service, unless otherwise specified by Sub-Zero, Inc.
Warranty Sub-Zero Outdoor Limited Warranty* FOR RESIDENTIAL USE FULL ONE YEAR WARRANTY** For one year from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero Factory Certified Service, unless otherwise specified by Sub-Zero, Inc.
SUBZERO.