Datasheet

www.suco.de
19
Adjustment range
in bar (tolerance at
room temperature)
Thread Normally open (no) –› |: Normally closed (nc) –› :|
0163 Diaphragm pressure switches with spade terminals
0.1 – 1 (± 0.2)
M 10x1 con. 0163 403 01 X 009 0163 404 01 X 013
M 12x1.5 0163 403 02 X 010 0163 404 02 X 014
G 1⁄4 0163 403 03 X 011 0163 404 03 X 015
NPT 1/8 0163 403 04 X 012 0163 404 04 X 016
G 1/8 0163 403 28 X 603 0163 404 28 X 604
M 10x1 cyl. 0163 403 13 X 003 0163 404 13 X 004
1 – 10 (± 0.5)
M 10x1 con. 0163 407 01 X 025 0163 408 01 X 029
M 12x1.5 0163 407 02 X 026 0163 408 02 X 030
G 1⁄4 0163 407 03 X 027 0163 408 03 X 031
NPT 1/8 0163 407 04 X 028 0163 408 04 X 032
G 1/8 0163 407 28 X 607 0163 408 28 X 608
M 10x1 cyl. 0163 407 13 X 007 0163 408 13 X 008
10 – 20 (± 1.0)
M 10x1 con. 0163 411 01 X 041 0163 412 01 X 045
M 12x1.5 0163 411 02 X 042 0163 412 02 X 046
G 1⁄4 0163 411 03 X 043 0163 412 03 X 047
NPT 1/8 0163 411 04 X 044 0163 412 04 X 048
G 1/8 0163 411 28 X 611 0163 412 28 X 612
M 10x1 cyl. 0163 411 13 X 011 0163 412 13 X 012
20 – 50 (± 2.0)
M 10x1 con. 0163 415 01 X 057 0163 416 01 X 061
M 12x1.5 0163 415 02 X 058 0163 416 02 X 062
G 1⁄4 0163 415 03 X 059 0163 416 03 X 063
NPT 1/8 0163 415 04 X 060 0163 416 04 X 064
G 1/8 0163 415 28 X 615 0163 416 28 X 616
M 10x1 cyl. 0163 415 13 X 015 0163 416 13 X 016
Diaphragm material
– areas of application
NBR
Hydraulic / machine oil, heating oil, air, nitrogen etc.
1
EPDM
Brake uid, ozone, acetylene, hydrogen etc.
2
FKM
Hydraulic uids (HFA, HFB, HFD), petrol/gasoline etc.
3
See page 16 for temperature ranges of diaphragm / seal materials
Order number:
0163 XXX XX X XXX
0163
Diaphragm pressure switches 42 V
Zinc-plated steel body (CrVI-free)
With spade terminals
Overpressure safe up to 600 bar
1)
Our pressure switches are
also available with factory
pre-set switching points.
Ready-wired versions can be
found starting on page 38
following.
We offer other body
materials and connecting
threads upon request.
Other diaphragm materials
are available on request,
e.g. HNBR or silicone.
AMP 6.3 x 0.8
tin-plated
46
hex 24
9
Accessories see page 17
With male thread
R o H S
compliant
1)
Static pressure, dynamic pressures should be 30 to 50% lower. These values refer to the hydraulic or pneu-
matic part of the pressure switch.