Full Product Manual

Windwood 42” Bathroom Vanity
Page 3 of 4
CARE, CLEANING AND MAINTENANCE
STEP 2
• With the vanity in its location and all plumbing in place, apply a bead of silicone to the unpolished back
side and bottom edge of the backsplash and secure it to the vanity and wall.
• Wipe away any excess silicone immediately. Allow 24 hours to dry.
Ensure that you apply the silicone to the rough
edge and that the smooth face is facing the front
• Dust regularly with a soft, dry cloth.
• Avoid the use of all chemicals, household cleaners and abrasives that may damage finish.
• Excessive exposure to sunlight and extreme changes in temperature and moisture can damage wood
furniture.
• Avoid placing hot appliances, such as curling irons and hot hair dryers directly on the countertop.
• Avoid placing extremely heavy items on the countertop.
•
Stone countertops are surprisingly resilient to stains and scratches. However, as a preventative measure,
any spills on the stone surfaces should be wiped up within a reasonable amount of time. Don't let liquid sit
on the stone overnight. Stone countertops are most prone to staining by oil and acid, so be sure to
blot these spills up as soon as they happen. Follow up by cleaning the stone with a mild non-abrasive
soap and water. In bathrooms specifically, stone tends to attract soap scum, just like man-made tile.
Rinse vanity top with clean, hot water frequently. The use of sealers is also a powerful preventative
measure. Your stone was sealed at the factory, but reapplication is necessary over time. The
frequency of countertop use and quality of the sealer will determine how often it needs to be reapplied.
We recommend using a penetrating non-toxic sealer for bath areas, but a food-safe sealer is typically
not necessary.
•
If stains and scratches on top countertop occur, there are many things you can do as a consumer to
remove them. Remove oil-based stains with acetone, mineral spirits, or ammonia. Organic stains like
coffee, tea, or juice can be removed with hydrogen peroxide, mixed with a few drops of ammonia. Water
spots or rings are the most common problem with bath vanities, and are caused by minerals left behind
when water evaporates. These can be removed by buffing the spots gently with 00 gauge steel wool. Small
nicks and scratches can often be removed the same way.
• Larger scratches, chips, and resilient stains on the countertop may require professional assistance.
Please contact your local stonemason for details.