Use and Care Manual

Section View
Place part #J on the bottom frame(#A6), using 3 bolts 1# and gaskets to fix.
Repeat the above procedures to assemble the other side.
③: Fix part #C3 to part #C1
with 2 bolts 3#, 4 gaskets
and 2 nuts.
④: Fix part #C3 to part #C2
with 2 bolts 3#, 4 gaskets
and 2 nuts.
Attention: To ensure the stability of the wall panel(#J) during assembly, you can
temporarily reinforce this position(☆) with bolts 2#, and replace it with other
correct bolts when the next installation is made.
!
Section View
Inside View Inside View
0 4