User Manual
Table Of Contents
- Overview
- Terminology
- Overview Diagram
- 1. 7 Segment Display
- 2. Preset/Select/Hold To Edit Buttons
- 3. Up & Down Buttons
- 4. Mix Knob
- 5. Lo Cut Knob
- 6. Hi Cut Knob:
- 7. Bypass LED
- 8. Bypass/Preset Down Switch:
- 9. Time Division LEDs
- 10. Division Button
- 11. Regen Knob
- 12. Time Knob
- 13. Modulation Depth Knob
- 14. Modulation Waveform Display & Select Button
- 15. Modulation Speed Knob
- 16. Tempo LED
- 17. Tap-Tempo Switch
- Inputs & Outputs
- Controls
- Presets
- MIDI
- Global Settings
- Example Settings
- Usage Cases
- Technical Specifications
- Warranty
- FCC Compliance
Discovery Delay – ControlsControls
14
Revision: 1.2 (7/1/2021)
Mix Knob
e [MIX] knob mixes in (or out) the delay eect� It also mixes in or out your guitar
signal�
From full counter clockwise to the middle, the knob is mixing the wet delay eect
from 0-100%
From middle to full clockwise, the wet delay eect stays 100%, while your dry guitar
signal fades out from 100% to 0% (at full clockwise)�
When the mix knob is 50% on (half way), it is 100% dry + 100% wet
Time Knob
e [TIME] knob can be used to:
1. Alter the milliseconds (40-1100ms in 5ms increments)
2. Alter the BPM (range from 55-250BPM)
depending on which is shown on the display�
e arrow buttons can also be used to push the delay beyond these limits, or incre-
ment by singular millisecond or BPM values�
100% Dry / 0% Wet
100% Dry / 100% Wet
0% Dry / 100% Wet
Example Mix Settings: