User Manual
Table Of Contents
- Overview
- Terminology
- Overview Diagram
- 1. 7 Segment Display
- 2. Preset/Select/Hold To Edit Buttons
- 3. Up & Down Buttons
- 4. Mix Knob
- 5. Lo Cut Knob
- 6. Hi Cut Knob:
- 7. Bypass LED
- 8. Bypass/Preset Down Switch:
- 9. Time Division LEDs
- 10. Division Button
- 11. Regen Knob
- 12. Time Knob
- 13. Modulation Depth Knob
- 14. Modulation Waveform Display & Select Button
- 15. Modulation Speed Knob
- 16. Tempo LED
- 17. Tap-Tempo Switch
- Inputs & Outputs
- Controls
- Presets
- MIDI
- Global Settings
- Example Settings
- Usage Cases
- Technical Specifications
- Warranty
- FCC Compliance
Discovery Delay – ControlsControls
15
Revision: 1.2 (7/1/2021)
Regen Knob
e [REGEN] knob sets the amount of feedback o the delay back to its internal
input mixer� is controls how long the delay repeats last until they decay away�
Due to the internal limiter in the regen circuit, maxed out regen settings allow for
distorted self oscillations and sound eects�
Hi Cut Knob
e high cut reduces high frequencies from the delayed signal, giving you a “darker”
sound commonly associated with bucket brigade analog delay pedals�
Fully counter-clockwise is the brightest and clearest tone� For the classic warm vin-
tage style analog delay tones, set the knob past half way� e high cut knob also helps
reduce noise and should be experimented with when running into the front of an
amp or gain stage for desired tone/noise�
For the clearest low noise delay eect, place the Discovery in the eects loop of your
amplier and keep the hi cut knob fully counter clockwise�
Lo Cut Knob
e [LO CUT] reduces bass from the delayed signal only� is is helpful to echo the
frequency ranges that you want to and prevent extra bass from muddying up your