User Manual
Table Of Contents
- Overview
- Terminology
- Overview Diagram
- 1. 7 Segment Display
- 2. Preset/Select/Hold To Edit Buttons
- 3. Up & Down Buttons
- 4. Mix Knob
- 5. Lo Cut Knob
- 6. Hi Cut Knob:
- 7. Bypass LED
- 8. Bypass/Preset Down Switch:
- 9. Time Division LEDs
- 10. Division Button
- 11. Regen Knob
- 12. Time Knob
- 13. Modulation Depth Knob
- 14. Modulation Waveform Display & Select Button
- 15. Modulation Speed Knob
- 16. Tempo LED
- 17. Tap-Tempo Switch
- Inputs & Outputs
- Controls
- Presets
- MIDI
- Global Settings
- Example Settings
- Usage Cases
- Technical Specifications
- Warranty
- FCC Compliance
Discovery Delay – PresetsPresets
19
Revision: 1.2 (7/1/2021)
Presets
Selecting a Preset
e [PRESET SELECT] button is used to look at what preset you are on and for se-
lecting a preset when moving to a new one�
1. Press [PRESET SELECT]�
2. Use [▲] and [▼] buttons to jump to a new location� e display will blink, indi-
cating the new preset has not been selected yet�
3. Press [PRESET SELECT] to select new location�
4. Press [PRESET SELECT] to view delay time on the display�
Editing / Saving Presets
Creating a new preset or Editing a current preset is the same process�
1. Select the preset you want to edit�
8888
is a good place to start for a fresh preset (the settings you currently see on
the pedal will be what you hear)�
2. Hold the [PRESET SELECT] button for half a second�
e display will show EDIT on the screen, followed by displaying the preset you are
editing, then the display will start to blink, indicating you are editing�
8888
P 018888