User Manual

Table Of Contents

Discovery Delay – Global SettingsGlobal Settings

Revision: 1.2 (7/1/2021)

Global Settings

Editing Global Settings

1. If the pedal is powered on, disconnect the power and wait at least 3 seconds

Note:

In rare instances, unplugging the power cable and replugging it too quickly can

stress the regulators and cause them to pull extra current and may risk damaging

your unit� Please wait at least 3 seconds before plugging it back in to prevent this�

2� Hold the [PRESET SELECT] button and power on the unit�

3. You will now enter a numbered list of global settings� Use the [▲] and [▼] but-

tons to scroll through the settings� Use the [PRESET SELECT] button to select a

setting�

4. Once a setting has been selected, you will return to the main numbered list�

When nished editing settings, scroll to the bottom of the list with [▼] until

8888

is displayed� Preset [PRESET SELECT] to nish altering the settings and

start the pedal�

8888

1. Bypass Mode:

[▼]

2. MIDI Channel:

Choose between ‘True’ bypass and

‘Buered’ bypass modes� When in

‘true’ bypass mode, the signal will go

directly from the pedal’s input to it’s

output without passing through the

pedal’s eect circuitry�

Set the MIDI channel you want your

Discovery Delay to communicate on,

1-16� e default is MIDI channel 1�

[▲]