® BUFFER USER GUIDE
Thank you for purchasing the Suhr Buffer ™. Please take the time to read this user guide to get the most out of your buffer and it’s applications. Today's players demand quality, reliability and great tone. To ensure that your investment in tone is preserved throughout your signal chain, the Suhr Buffer utilizes only the highest quality components such as: low noise audiophile Op-Amps, Glass Epoxy PCB, and an machined 6061 billet aluminum enclosure.
FEATURES The Suhr Buffer offers a variety of features for every playing situation. The Buffer is built using the highest quality components and equipped with two independent outputs, all in a compact, solid, aluminum enclosure. One output (ISO) is isolated and utilizes a transformer to eliminate noise from ground looping and features a 180º Phase Reversal switch to keep your signal in phase when splitting between two amplifiers.
OPERATION DC INLET: Use a compatible 9-18Vdc with a center negative power supply. INPUT: Instrument Input, use this jack to connect to your instrument. OUTPUT: Primary output, use this jack to connect to an amplifier or effect device. ISO OUTPUT (transformer isolated): Secondary output, use this to split your instrument’s signal to an additional amplifier or sound source. PHASE SWITCH (ø): The Phase Switch reverses the polarity of the Buffer’s ISO Output by 180º.
SPECIFICATIONS: Input Impedance: 1M Ω Output Impedance: 150 Ω Power Connector: 9v Operating Voltage: 4.5Vdc - 18v Maximum Voltage: 20Vdc Over Voltage Protection: Yes Current Consumption: <5ma Dimensions: L- 2.87” x W- 2.53” x D- 1.23” Weight: .379 lbs. ROHS Compliant: Yes WARRANTY FOR SUHR AMPLIFIERS AND ELECTRONIC PRODUCTS: JST warrants for lifetime from date of purchase by the initial retail purchaser that this product shall be free from defects in workmanship.
