User Manual

OPERATION
DC INLET: Use a compatible 9-18Vdc with a center negative power supply.
INPUT: Instrument Input, use this jack to connect to your instrument.
OUTPUT: Primary output, use this jack to connect to an amplifier or effect
device. !!
ISO OUTPUT (transformer isolated): Secondary output, use this to split
your instrument’s signal to an additional amplifier or sound source.
PHASE SWITCH (ø): The Phase Switch reverses the polarity of the
Buffer’s ISO Output by 180º. Activate this switch to keep both output
sources in phase. !
OUT- Normal (non-reversed)
IN- Signals phase reversed by 180º