DUAL BOOST USER GUIDE ™
Thank you for purchasing the Dual Boost™. Please take the time to read through this guide to familiarize yourself with its many features and applications. OVERVIEW The Dual Boost is a versatile, dual-mode, transparent clean boost, housed within a compact, pedalboard friendly enclosure.
OPERATING INSTRUCTIONS POWER REQUIREMENTS The Dual Boost can be powered via 9V battery or 9VDC regulated, center negative power supply. BATTERY MONITOR Upon powering up, the battery voltage is measured. If the voltage measured is lower than 5V, Dual Boost’s LED will flash 3 times to alert you that it’s time to replace the battery. Once the 9V battery is replaced, normal operation will resume. Should a battery fail completely (<4.
OPERATIONS (continued) CHANGING FX LINK MODE / POWER UP PROCEDURE Dual Boost is shipped by default in Green (Green FX LINK) mode. To change FX LINK modes, press and hold the footswitch while powering up TM = MULTI-FUNCTION TECHNOLOGY Dual Boost. The LED will illuminate (orange/green) temporarily to indicate the FX LINK mode. To return Dual Boost to the previous FX LINK mode please repeat the previous power up procedure.
SAMPLE SETTINGS SUBTLE TRANSPARENT PUSH TRANSPARENT BOOST BASS/TREBLE BOOST When set to the more mild 10dB boost At this setting, the Dual Boost can take The Hi-Cut control is used to dial the interaction between your guitar or take an already overdriven amp to to impart some coloration. In this range, the Dual Boost compliments and amplifier, enhancing playability while retaining dynamics.
SPECIFICATIONS* Input Impedance: 1M Ohm Output Impedance: < 1K Ohm Power Connector: 9Vdc regulated, center negative, 2.1mm x 5.5mm Operating Voltage: 4.5V to 9V (nominal 9V) Maximum Voltage: 10Vdc Reverse Battery Protection: Yes Over Voltage Protection: Yes Current Consumption: 21 mA (MAX) Estimated Battery Life: 19 Hours (ON) to 19.775 (OFF) [Alakline] Fx Link Connector: 1/8" stereo Fx Link Maximum Voltage: 3.3Vdc Shield to Tip: Boost 1 Shield to Ring: Boost 2 Dimensions: 2.
