Brochure

11Sullair.com
MDT-22 and MDT-30 Demolition Tools
Two Bolt Backhead
This unique design reduces handle breakage. The
common problem of a threaded handle-to-barrel
connection coming loose and damaging the handle and
internal parts is therefore eliminated.
D-handle
The strong “D” configuration is large enough to provide
a comfortable, sure grip even for a gloved hand.
Minimal Lubrication Required
With its unique design and materials, normal oil carryover
from the compressor, combined with moisture in the air,
will usually provide sufficient lubrication under normal
operating conditions.
Smoother Operation
The Sullair demolition tool’s unique design
results in greater operator comfort.
Stroke Length
The piston has been sized relative to the length of the
stroke to provide an improved weight/power ratio.
Air Inlet Option
Two air inlet bushings are furnished: 3⁄8” NPT and
7⁄8”-24, internal thread. The bushings provide for
versatile hose connections while protecting the
handle inlet threads.
Rotatable Exhaust Deflector
Directs exhaust air away from the operator and provides
a comfortable grip. It also greatly decreases the sound
level of the tool.
MDT-30
The MDT-30 has reliable screw-on
retainer (no springs) and utilizes
standard 11 x Jumbo rivet buster
steel, sleeves and bumpers. One-
year warranty, excluding wear
items, sleeves and bumpers.
MDT-22
The MDT-22 has quick change latch
retainer and utilizes standard 7⁄8” x 31⁄4”
hex steel. Two-year warranty.
Model
Part
Number
Chuck
Size (in)
Retainer
Bore & Stroke
(in)
Blows
per minute
Air Consumption
(cfm)
Air Inlet
(NPT)
Weight
(lbs)
Length
(in)
MDT-22 68255010 7/8” Hex x 3-1/4” Latch 1-1/2” x 4-1/2” 1450 33
3/8” NPT or
7/8”-24
24 20”
MDT-30 68255011 11 x Jumbo Screw-on 1-3/8” x 7-3/8” 1080 37
3/8” NPT or
7/8”-24
33 24-1/2”
TECHNICAL SPECIFICATIONS
Demolition Tools