Brochure

3Sullair.com
Pavement Breakers Designed to
Work Better and Last Longer
High-Wear Parts Reduced
Sullair breakers have eliminated most high-wear parts.
Fewer parts mean less wear, less maintenance, and less
downtime.
No Multi-Part Tappet System
Unlike conventional breakers, Sullair breakers have
no multi-part tappet system. With no tappet system,
which requires three independent impacts, noise
is reduced.
One-Piece, Non-Protrusive Housing
A leak-proof air cushion forms at the end of the piston
stroke and stops the piston from direct impact when the
tool is not breaking. The elimination of side rods, nuts
and springs makes Sullair breakers sleeker and more
comfortable to operate.
Minimal Lubrication Required
With only two parts moving during operation, normal oil
carryover from the compressor, combined with moisture
in the air, will usually provide sufficient lubrication under
normal operating conditions. Manual lubrication before
storage is sufficient.
Parts Interchangeability
Standardization of design permits a high degree of inter-
changeability of parts between Sullair models.
Quieter
The piston, impacting directly on the steel shank rather
than a tappet, reduces noise level of the breaker.
Super-Silenced, Anti-Freeze Models
A unique silencer reduces noise levels by 6 dBA,
while preventing the tool from freezing, even in the
coldest climates.
Smoother Operation
Reduced kickback is less fatiguing to the operator.
Simple Latch Design
Durable double roll pin permits easy steel changing.
Less Air Consumption
The direct impact piston design, non-corrosive
distribution valve and one-piece housing dramatically
reduce air con sumption. You can operate more tools
from a single com pressor.
Two-Year Limited Warranty
All Sullair breaker parts are warranted for two-years
against manufacturing defects. Additionally, should a part
wear out during normal operation, it is covered by the
Sullair exclusive two-year warranty.
Sullair Pavement Breakers are Designed for Work Efficiency
and a Long, Trouble-Free Life
Latch retainer
One-piece housing
Leakproof air cushion
Plated finish
Exhaust deflector
Variable speed throttle
Distribution valve
Swivel air inlet
Direct impact piston
Replaceable chuck bushing
Double roll pin
Standard hose coupling