Brochure

6
Four Bolt Backhead
This unique design reduces handle breakage. The
common problem of a threaded handle-to-barrel
connection coming loose and damaging the handle
and internal parts has been eliminated.
D-handle
The strong “D” configuration is large enough to allow a
comfortable, sure grip, even for a gloved hand.
Minimal Lubrication Required
Because of the Sullair chipping hammer’s unique design
and materials, normal oil carryover from the compressor,
combined with moisture in the air, will usually provide
sufficient lubrication under normal operating conditions.
Rotatable Exhaust Deflector
A durable molded exhaust deflector directs exhaust air
away from the operator.
Standard Oval Return Retainers
Contractors’ choice spring retainer. Round collar retainer
style available as an accessory.
User-Friendly, Screw-On Ball Retainer Option
Offering a quick and easy way to change steel, simply
by pulling the retainer back, inserting your steel and
releasing to lock the steel in place.
Choice of Stroke Length and Bushings
The Sullair chipping hammer is available in 2”, 3” and 4”
strokes with either .680 round or .580 hex bushings.
Air Inlet Option
Two air inlet bushings are furnished: 3⁄8” NPT and 7⁄8-24,
internal thread. The bushings provide for versatile hose
connections while protecting the handle inlet threads.
Two Year Limited Parts Warranty
Sullair provides a limited parts warranty of two-years on
the handle and cylinder and one-year on all other parts
except the retainer and retainer springs.
Chipping Hammers Built to Last
The Sullair Chipping Hammer is Designed for Rugged Dependability
MCH-2
MCH-3
MCH-4
MCH-3S and MCH-4S
Screw-on Retainer
No Springs
4-bolt handle connection
Large D-handle
Two air inlets furnished
Exhaust deflector
Choice of bushings
Choice of strokes
Plated finish on barrel