‘Add an additional video monitor or camera to customize your Fr Ba boy's Quiet Sounds™ Video Monitor, The additional video monitor gives . you the convenience of seeing your child from another location without having to move the original video monitor between rooms. The additional camera allows you to monitor a second room with another child or a playroom for day use. Please note: The Video Monitor is a wireless product and subject to environmental conditions.
A WARNING: THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. + Prevent cord entanglement — do not place Camera in crib or within arm’s reach of baby. Use enclosed Security Clips to help secure cords away from baby’s reach. Never use extension cords with AC adapters. Only use the AC Adapters provided. « When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end. « Test monitor before first use, periodically, and when changing location of the Camera.
PROBLEM SOLVING: FEATURES & COMPONENTS: Problem Solution No picture or satiation: TV * Make sure the TV is muted on + Make sure the AC Adapters are plugged in » Make sure the outlets are working * Make sure the Camera and TV are set to the same channel (try using the other channel if necessary) * Make sure the antenna on the TV is fully extended Sound but no picture Press the Quick View/Video On/Off Button once to tum on video mode Try adjusting the Brightness, Contrast and Vertical Hold dials on the TV » T
SET UP & USE: SET UP & USE (continued): Camera QD Table Top or Wall Mounting: Tito Radiotelephone up, and pull up (see Figure A). FIGURED Plate Carer in nursery for best view of baby and crib. Place the Camera 1 1 ond flat surface, such as a dresser, bureau, or shelf. : Or mount the Camera on a wall. Be sure to test reception and Camera positioning before mounting to a wall (see "Testing Your Initial Set Up” section). To Wall Mount: a) Pr-drill a hole in the wall (3/16, 4.8mm, drill bit). See Figure B.