User Manual

10. Install cylinder attach brackets and hydraulic cylinders onto rock shafts at locations shown in
hydraulic tine angle layout drawing. Secure levers and clamps (8HD7110) next to bushings to
prevent side to side movement of rock shaft.
9. After installing all lower bolts, remove existing upper bolts. Further elevate rock shaft and insert
top 3/4” X 5-1/2” bolts.
OnrighthandsideofSuperharrowPlus,positionrockshaftsoitextends1”aheadofrstbush-
ing next to wing tube knuckle.
Onlefthandsideofmachine,rockshaftneedstoextend4-1/4”aheadofrstbushingnextto
wing tube knuckle.
SECTION 2 - SUPERHARROW PLUS
2-20