User Manual

INSTALLATION INSTRUCTIONS

8C2270 - CABLE GUIDE BRACKET

72’ & 88’ SUPERHARROW 2650

Parts required for installation:

Qty PN Description

2 8C2270 Cable Guide Bracket

2* 8X0113 Bolt 3/4” x 5” (Use without Hyd. Tine Angle Pivot Bracket)

4* 8X0123 Bolt 3/4” x 5-1/2” (Use with Hyd. Tine Angle Pivot Bracket)

4 8X0317 3/4” Flat Washer

Refer to the photos below to install the cable guides. The guides must be mounted on the top out-

sideoftherstmountingbracketoneachwing.Theguidepreventstheinsidepullcablefromget-

ting caught beneath the drawbar. Replace existing 3/4” bolts in mounting brackets with longer bolts

toallowinstallationof8C2270.Securewithexisting3/4”locknutsandatwashers.

CAUTION: Spring at tension and weight of attached brackets must be supported when

replacing 3/4” bolts.

8C2270

SECTION 3 - SUPERHARROW 2650

3-12