INSTRUCTION MANUAL FOR MODELS: FS603FROST Thank you for putting your trust in our company and for purchasing this appliance. We hope it will successfully serve its purpose for many years. The FS603FROST is a front-opening freezer designed to operate at 24ºF Felix Storch, Inc. Summit Appliance Division 770 Garrison Avenue Bronx, NY 10474 www.summitappliance.
Before Putting Into Use Before connecting the beer froster to the power supply, leave it standing for about 24 hours. This will reduce the possibility of malfunctions in the cooling system due to transport handling. Clean the beer froster thoroughly; especially in the interior (See Cleaning and Maintenance).
Important Warning! To reduce the risk of fire, electrical shock, or injury when using your appliance, follow these basic precautions. Read all instructions before using the appliance The appliance must be correctly connected to the power supply. Disconnect the appliance from the power supply before repairing and/or cleaning it (only a qualified technician should repair it). Use only enclosed tools or tools recommended by the manufacturer.
Placing and Installation Choosing the Right Place Place the beer froster in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.
Description of the Beer Froster Door Hinge – Right hand only Shelves The shelves are fixed. Forget what you know about cold beer, Summit Appliance has just changed everything. With the Summit Cold Cavern you get beer so cold the bottle literally frosts over when removed from the unit! How cold is it? The Cold Cavern stores your beer at a frigid 24°F, just before freezing, in order to give you the coldest crispest beer possible.
Operation Control Temperature Selection The beer froster can be set at warmer temperatures if that is desired. Some brands of beer may taste better at slightly warmer temperatures. Digital Thermostat Instructions If you find that it is necessary to change the temperature setting for your digital thermostat controlled refrigerator, please refer to the following instructions.
Maintenance and Cleaning Manual Defrosting of the All-Freezer When the frost and ice layer in the freezer is 1/8” thick you should clean the beer froster. First, unplug the unit Second, set the thermostat to room temperature. Third, sop up the water with a towel as the ice melts. Fourth, dry the walls and bottom with a towel. Fifth, reset the thermostat to 24 F. and plug in the unit. Cleaning the Appliance Disconnect the power supply before cleaning the beer froster.
Switch Off the Beer Froster When Not in Use If you do not intend to use the beer froster for a long period of time disconnect the power supply. Then take out the beer and defrost and clean the appliance. Leave the door slightly open. Trouble-Shooting Guide During the service of your beer froster, you can come across some troubles that in most cases result from improper handling of the appliance that can easily be eliminated.
Noise Cooling in the beer froster is enabled by the compressor, this produces noise. How noisy the appliance is depends on where it is placed, how it’s used and how old the appliance is. After starting the beer froster, the operation of the compressor may be louder and this does not mean something is wrong with the appliance. The noise will reduce gradually, this will not affect the lifetime of the appliance. Sometimes unusual and strong noises occur which is rather unusual for the appliance.
NOTES
NOTES
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects.
