Manualshelf

Instruction Manual

ManualsBrandsSummit Appliance ManualsDishwashers24" Wide 208-240V Heat Pump Dryer
11121314151617181920
16
Full Condensation Tank
When the condensate tank is full, the symbol will illuminate, and the drying cycle will pause.
Empty the condensate tank, and then press the START/PAUSE button to resume the
drying cycle from the point at which it was interrupted.
Power supply failure
After a power supply interruption, and the power supply is resumed, the signal light
on the START/PAUSE button will flash. Press the START/PAUSE button to
resume the drying process.
Changing the Drying Program/Functions
1.
Press the ON/OFF button to switch off the dryer, then press the ON/OFF button to
switch it on again.
2.
Rotate the program selector knob to the desired drying cycle, or choose extra
functions.
3.
Select another drying cycle/function, and press the START/PAUSE button to start the new
drying cycle.
Adding Laundry After the Drying Cycle Starts
CAUTION: When loading the laundry, make sure you do not burn yourself when you open
the dryer door.
1.
Open the dryer door and press the START/PAUSE button.
2.
Insert the laundry and press the button START/PAUSE button to resume the
drying cycle.
NOTE: The drying time may be extended if addtional items are added to the unti after the drying
cycle has started.
Personal Settings Menu
1.
Press the ON/OFF button.
2.
Simultaneously press the positions EXTRA DRY and START DELAY buttons, and
hold them for 3 seconds. The START DELAY, DRYING TIME, FILTER, and
CONDENSATE TANK symbols will illuminate.
3.
Number 1 will appear on the LED display, indicating the settings function.
4.
Rotate the program selector knob to the left or to the right to choose the function to
change.
5.
Press on the TIME button to confirm the desired functions.
6.
Press the EXTRA DRY button to go back one step. If the desired settings are not
selected in 20 seconds, the program will automatically return to main menu.
NOTE: Number 1 indicates the Acoustic signal volume setting. Acoustic signal volume
can be set at four levels (0 means the sound is off; 1 means that the button sound
is activated; 2 means low volume, and 3 means high volume). Choose the volume
level by rotating the program selector knob to the left or to the right. Number 2
indicates reset of Personal program settings to factory defaults.