Model: SM901WH Microwave Oven User's manual 1. Please read these instructions carefully before installing and operating the oven. Keep them for further reference. 2. Record in the space below the SERIAL NO. found on the nameplate on your oven and retain this information for future reference. SERIAL NO.: 3. Please save sales receipt for warranty. Felix Storch, Inc. An ISO 9001:2008 registered company 770 Garrison Avenue Bronx, NY 10474 www.summitappliance.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY Do not attempt to operate this oven with the door-open since open-door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. 2. Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. 3. Do not operate the oven if it is damaged.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should be followed, including the following: d . Do not use the cavity for storage purposes. Do not leave paper products, cooking utensils or food in the cavity when not in use. WARNING - To reduce the risk of burns, electric shock, fire, and injury to persons or exposure to excessive microwave energy: 9.
example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations. 19. Do not operate any heating or cooking appliance beneath this appliance. 20. Be certain the glass tray and roller rings are in place when you operate the oven 16. Do not operate this appliance if it has a damaged cord or a plug, if it is not working properly or if it has been damaged or dropped. 21. This appliance should be serviced only by qualified service personnel.
INSTALLATION GUIDE 1. 2. 3. 4. Make sure that all the packing materials are removed from the inside of the door. Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven but contact qualified service personnel.
Notes: Rad io or TV In t e r f e r e nce If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person. Should there be any interference caused by the microwave oven to your radio or TV, check that the microwave oven is on a different circuit, relocated the radio or TV as far away from the oven as feasible or check position and signal of receiving antenna.
Containers such as margarine tubs can melt in the microwave. Should you wish to check if a dish is safe for microwaving, place the empty dish in the oven and microwave on HIGH for 30 seconds. A dish which becomes very hot should not be used. Metal utensils — These can damage your oven. Remove all metal before cooking.
SPECIFICATIONS Power Consumption: 120V~60Hz, 1050W (Microwave) Output: 700W Operation Frequency: 2450MHz Outside Dimensions(H×W×D): 10-5/16 × 17-13/16 × 13 in. Oven Cavity Dimensions(H×W×D): 8-11/16 × 12-3/8 × 11-9/16 in. Oven Capacity: 0.7 cu.ft. Cooking Uniformity: Turntable System Net Weight: Approx. 23.1 lb. Note: The above data may be subject to change without notice. PART NAMES 1. 2. 3. 4. 5. 6. 7.
CONTROL PANEL MENU ACTION SCREEN Cooking time, power, indicators and present time are displayed. QUICK COOK BUTTONS Instant settings to cook popular foods. POWER Use to set power levels other than High. TIMER Timer functions independently, even while a cooking program is in process. COOK Use for multi-stage cooking. Enables cooking at multiple power and time settings automatically. COOK BY WEIGHT Programmed cooking based on weight of foods to be cooked.
9 90% SETTING THE CLOCK 8 80% 1. Touch CLOCK pad. 7 70% 2. Use the number pads to enter the correct time. You must touch at least three numbers to set the clock (one for hour and two for minutes). 6 60% 5 50% 4 40% 3. Touch CLOCK pad again. 3 30% NOTES: 2 20% 1 10% 0 0% This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.
After setting SPEED DEFROST, oven can be programmed to automatically switch to one or two-stage cooking. Converting Fractions of a Pound to Ounces Fractions of a pound Ounces Less than .03 0 .03 to .09 1 .10 to .15 2 .16 to .21 3 .22 to .27 4 .28 to .34 5 .35 to .40 6 .41 to .46 7 .47 to .53 8 .54 to 59 9 .60 to .65 10 number pad. .66 to .71 11 3. Enter weight. .72 to .78 12 4. Touch START/STOP. .79 to .84 13 Cook By Weight Code Description .85 to .
LOCK is indicated on the display. SETTING CHILD LOCK To cancel, press and hold RESET for 3 seconds. LOCK indication disappears The safety lock prevents unsupervised operation by children. To set, press and hold RESET for 3 seconds. QUICK COOK SETTINGS The QUICK COOK settings allow you to cook or reheat food automatically without entering power level or time. For larger potatoes (8 - 10 oz. each) : 1. Touch POTATO pad twice. For smaller portions, simply touch the applicable pad and start.
Microwaving large frozen dinners (10 - 12 oz. each): FROZEN DINNER 1. Touch FROZEN DINNER pad twice. For one or two small frozen dinners (7 - 9 oz. each): 2. For 1 entree or 2 entrees, touch the number pad “1” or “2”: 1. Touch FROZEN DINNER pad once. 3. Touch START/STOP. 2. For 1 entree or 2 entrees, touch the number pad “1” or “2” REHEAT 3. Touch START/STOP pad. 1. Touch REHEAT pad once. 2. Touch START/STOP. CLEANING AND CARE 1. 2. 3. 4. 5. 6. 7. warm sudsy water or in a dishwasher.
LIMITED WARRANTY 90-DAY LIMITED WARRANTY Within the 48 contiguous United States, for 90 days from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for 90 days from manufacturing defects.