Instruction Manual

9
 When you use the appliance for the first time, or restart it after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the display. This is normal and due to the length of inactivation time. Once the
appliance has been running for a few hours, everything will be back to normal.
Temperature Alarm Function
If the ambient temperature is ≥30°C (86°F) for 2 hours, the high temperature alarm will be
activated, the LED will display "HH", the buzzer will sound continuously, the cooling system
continues to work. The display returns to normal when the high temperature condition is relieved.
If the ambient temperature is <0°C (32°F) for 1 hour, the low temperature alarm will be activated,
the LED will display "LL", the buzzer will sound continuously, the cooling system will stop working.
The display returns to normal when the low temperature is relieved.
NOTE:
 It is normal that the cabinet shows “HH” or “LL” from time to time. If it occurs frequently or lasts
for a long time, you can restart the unit by unplugging it, then re-plugging after 5 minutes. If
the problem occurs again after restarting, please contact customer service.
 Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your
appliance. If you attempt to start the appliance before the end of this time delay, the appliance
will not turn on.
 If you turn on the appliance for the first time or after a restart, or after it has been out of
operation for a long time, there may be a temperature difference between the temperature
inside the appliance and that on the LED display. This is a normal event caused by the
duration of the activation period. Leave the appliance turned on for several hours and the
temperature will stabilize during operation.