User's Manual

Hardware Integration Guide – SDC-PE15N
17 SDC-PE15N_HIG1.0
© 2006 – 2009 Summit Data Communications, Inc. All rights reserved.
 Type: Dipole
 Maximum 2.4 GHz Gain: 2.2 dBi
 Tested and Certified 2.4 GHz Transmit Power: 90% of maximum setting (power must be reduced
to 90%)
Radiall Larson Dipole
 Form Factor: Whip
 Type: Dipole
 Maximum 2.4 GHz Gain: 1.6 dBi (not used during testing)
 Maximum 5 GHz Gain: 5 dBi
HUBER+SUHNER
 Form Factor: Whip
 Type: Monopole
 Maximum 2.4 GHz Gain: 3 dBi
 Maximum 5 GHz Gain: 6.5 dBi
 Tested and Certified 2.4 GHz Transmit Power: 95% of maximum setting (power must be reduced
to 95%)
 Tested and Certified 5 GHz Transmit Power: 100% of maximum setting (no reduction of power is
required in the 5 GHz band)
Labeling Requirements
The final end product must be labeled in a visible area with the following notice:
Contains IC ID: 6616A-SDCPE15N
European Union
User’s Guide Requirements
The integrator must include specific information in the user’s guide for the device into which the SDC-
PE15N is integrated. In addition to the required FCC and IC statements outlined above, the following
R&TTE statements must be added in their entirety and without modification into a prominent place in the
user’s guide for the device into which the SDC-PE15N is integrated:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
 EN60950-1:2001 A11:2004
Safety of Information Technology Equipment
 EN 300 328 V1.7.1: (2006-10)